Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: PLATEWORKS, LLC

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of PLATEWORKS, LLC in 106 W. TYLER STREET, DALTON, GA 30720 (NAICS 332710). OSHA activity number 342410982.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Plateworks, LLC — free Get an email when a new federal OSHA severe-injury report for Plateworks, LLC is published. One employer, no account, unsubscribe in one click.
Establishment
PLATEWORKS, LLC
Site address
106 W. TYLER STREET
City
DALTON
State
GA
ZIP
30720
Mailing
P.O. BOX 1736, DALTON, GA 30722
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332710
Employees
5
Ownership type
A

4 citations on file for this inspection.

1910.101 B

Serious Gravity 5 1 instance 1 exposed
Issued
Jul 19, 2017
Abate by
Aug 14, 2017
Penalty
Initial $2,716 · Current $1,630 Reduced
29 CFR 1910.101(b): The in-plant handling, storage, and utilization of all compressed gases in cylinders, portable tanks, rail tank cars, or motor vehicle cargo tanks were not in accordance with Compressed Gas Association Pamphlet P-1-1965, which is incorporated by reference as specified in CFR 1910.6:  (a) Welding area-  An employee was exposed to a struck-by hazard from a compressed oxygen cylinder that was not secured to prevent it from being knocked over. The cylinder was located adjacent to a wall in the welding area and was not chained or strapped to anything for protection or stability.
Recent events (2)
  • — I (S) $1629.6
  • — Z (S) $2716

1910.1200 E01

Serious Gravity 1 1 instance 1 exposed
Issued
Jul 19, 2017
Abate by
Aug 14, 2017
Penalty
Initial $1,630 · Current $978 Reduced
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:  (a) Welding area- The employer had not established a written hazard communication program for an employee exposed to hazardous substances such as, but not limited to, propane, compressed gases including argon/carbon dioxide, and  oxygen, and lacquer thinner containing, methanol, acetone, toluene, and 2-butoxy-ethanol.
Recent events (2)
  • — I (S) $978
  • — Z (S) $1630

1910.1200 G01

Serious Gravity 1 1 instance 1 exposed
Issued
Jul 19, 2017
Abate by
Aug 14, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(g)(1): Employers did not have a safety data sheet in the workplace for each hazardous chemical which they use:  (a) Welding area- The employer did not maintain safety data sheets (SDS's) for hazardous substances used at the site including, but not limited to, propane, compressed gases including argon/carbon dioxide, and  oxygen, and lacquer thinner containing, methanol, acetone, toluene, and 2-butoxy-ethanol.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 H01

Serious Gravity 1 1 instance 1 exposed
Issued
Jul 19, 2017
Abate by
Aug 14, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:  (a) Welding area- The employer had not provided hazard communication training to an employee exposed to hazardous substances such as, but not limited to, propane, compressed gases including argon/carbon dioxide, and  oxygen, and lacquer thinner containing, methanol, acetone, toluene, and 2-butoxy-ethanol.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Plateworks, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342410982.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.