Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,198,892Inspections Most recent open 2026-09-03 Last loaded 2026-09-07

OSHA Inspection: MARINE FLOORING LLC

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of MARINE FLOORING LLC in 200 LIGON STREET, NORFOLK, VA 23523 (NAICS 336611). OSHA activity number 342412095.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Marine Flooring LLC for free Get an email when a new federal OSHA severe-injury report for Marine Flooring LLC is published. One employer, no account, unsubscribe in one click.
Establishment
MARINE FLOORING LLC
Site address
200 LIGON STREET
City
NORFOLK
State
VA
ZIP
23523
Mailing
12022 KNIGGE CEMETERY RD, STE B, CYPRESS, TX 77429
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Health
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
336611
Employees
35
Ownership type
Private (A)

3 citations on file for this inspection.

1910.95 C01

Serious Gravity 5 2 instances 3 exposed
Issued
Aug 23, 2017
Abate by
Oct 11, 2017
Penalty
Initial $6,339 · Current $6,339

Hazardous substances 81108111

29 CFR 1910.95(c)(1): The employer did not administer a continuing, effective hearing conservation program as described in 29 CFR 1910.95(c) through (o) whenever employee noise exposures equal or exceed an 8-hour time-weighted average sound level of 85 decibels measured on the A scale, or equivalently a dose of fifty percent:  200 Ligon St., Norfolk, VA 23523, U.S.S. Gonzalez: On or about June 28, 2017, and times prior thereto, employees were exposed to noise levels in excess of the allowable 8-hour time weighted average (TWA) of 85dBA. This violation was observed on or about June 28, 2017,  a) Where noise sampling performed up to 264 minutes indicated that an employee was exposed up to an approximately 379.1 percent noise dose which is equivalent to 99.6 dBA, exposing the employee to potential hearing loss. Zero exposure was assumed for the 216 minutes not sampled.  b) Where noise sampling performed up to 262 minutes indicated that two employees were exposed up to an approximately 149.7 percent noise dose which is equivalent to 92.9 dBA, exposing employees to potential hearing loss. Zero exposure was assumed for the 218 minutes not sampled.  Abatement certification and documentation required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement. Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic or video evidence of abatement or other written records.
Recent events (1)
  • · Z (S) $6339

1910.134 E01

Serious Gravity 1 1 instance 1 exposed
Issued
Aug 23, 2017
Abate by
Oct 11, 2017
Penalty
Initial $3,802 · Current $3,802
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:  a) 200 Ligon St., Norfolk, VA 23523, U.S.S. Gonzalez: On or about June 28, 2017, and times prior thereto, the employer did not provide a medical evaluation for a temporary employee that was required to wear a respirator for operations that included removing flooring with a DeWalt chipping hammer, exposing the employee to respiratory hazards.  Abatement certification and documentation required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement. Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic or video evidence of abatement or other written records.
Recent events (1)
  • · Z (S) $3802

1910.134 F02

Serious Gravity 1 2 instances 2 exposed
Issued
Aug 23, 2017
Abate by
Oct 11, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.134(f)(2): Employee(s) using a tight-fitting facepiece respirator were not annually fit tested:  a) 200 Ligon St., Norfolk, VA 23523, U.S.S. Gonzalez: On or about June 28, 2017, and times prior thereto, the employer did not provide a fit test at least annually for an employee that was required to wear a respirator for operations that included removing flooring with a DeWalt jackhammer, exposing the employee to respiratory hazards.  b) 200 Ligon St., Norfolk, VA 23523, U.S.S. Gonzalez: On or about June 28, 2017, and times prior thereto, the employer did not provide a fit test at least annually for a temporary employee that was required to wear a respirator for operations that included removing flooring with a DeWalt chipping hammer, exposing the employee to respiratory hazards.  Abatement certification and documentation required within 10 days after abatement date. The certification shall include a statement that abatement is complete, the date and method of abatement, and state that employees and their representatives were informed of this abatement. Abatement documentation shall include documents demonstrating that abatement is complete, such as evidence of the purchase or repair of equipment, photographic or video evidence of abatement or other written records.
Recent events (1)
  • · Z (S) $0

View Marine Flooring LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 342412095.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.