Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: BAYOU FABRICATED PRODUCTS, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of BAYOU FABRICATED PRODUCTS, INC. in 2052 DIBENEDETTO LN., PORT ALLEN, LA 70767 (NAICS 332312). OSHA activity number 342412731.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Bayou Fabricated Products, INC. — free Get an email when a new federal OSHA severe-injury report for Bayou Fabricated Products, INC. is published. One employer, no account, unsubscribe in one click.
Site address
2052 DIBENEDETTO LN.
City
PORT ALLEN
State
LA
ZIP
70767
Mailing
2052 DIBENEDETTO LN., PORT ALLEN, LA 70767
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332312
Employees
25
Ownership type
A

4 citations on file for this inspection.

1910.133 A03

Serious Gravity 5 1 instance 1 exposed
Issued
Aug 24, 2017
Abate by
Sep 8, 2017
Penalty
Initial $2,897 · Current $1,738 Reduced
29 CFR 1910.133(a)(3): The employer did not ensure that each affected employee, who wore prescription lenses while engaged in operations that involved eye hazards, used protection that incorporated the prescription in its design, or wore eye protection over the prescription glasses or protective lenses with side shields:  On or about June 21, 2017, at Bayou Fabricated Products, Port Allen, LA; the employer failed to issue side shields, prescription safety glasses, or eye goggles to an employee who wore prescription lens while fabricating metal.
Recent events (2)
  • — I (S) $1738.2
  • — Z (S) $2897

1910.134 C01

Serious Gravity 1 1 instance 25 exposed
Issued
Aug 24, 2017
Abate by
Sep 8, 2017
Penalty
Initial $2,173 · Current $1,304 Reduced
29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use:  On or about June 21, 2017, at Bayou Fabricated Products, Inc., Port Allen, LA; the employer failed to implement and provide a Respiratory Protection Program for employee's use. Employees voluntarily used half face tight fitting respirators during painting and blasting operations.
Recent events (2)
  • — I (S) $1303.8
  • — Z (S) $2173

1910.134 E01

Serious Gravity 1 1 instance 3 exposed
Issued
Aug 24, 2017
Abate by
Sep 8, 2017
Penalty
Initial $2,173 · Current $1,304 Reduced
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:  On or about June 21, 2017, at Bayou Fabricated Products, Inc., Port Allen, LA, employees in the blasting and painting area were exposed to respiration hazards while wearing tight fitting half face respirators without having been medically evaluated.
Recent events (2)
  • — I (S) $1303.8
  • — Z (S) $2173

1910.147 C04 II B

Serious Gravity 1 1 instance 1 exposed
Issued
Aug 24, 2017
Abate by
Sep 8, 2017
Penalty
Initial $2,173 · Current $1,304 Reduced
29 CFR 1910.147(c)(4)(ii)(B): The energy control procedures did not clearly and specifically outline the steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy.  On or about June 21, 2017, at Bayou Fabricated Products, Inc., Port Allen, LA, the employer failed to develop a specific energy control procedure for shutting down, isolating, locking, and securing the Multi-powered Ocean Avenger CNC Beam Drill Line, which uses electric, pneumatic and hydraulic energy sources.
Recent events (2)
  • — I (S) $1303.8
  • — Z (S) $2173

View Bayou Fabricated Products, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342412731.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.