Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,196,249Inspections Most recent open 2026-08-20 Last loaded 2026-08-24

OSHA Inspection: G AND D ENTERPRISES INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of G AND D ENTERPRISES INC. in 1425 E. ALGONQUIN ROAD, ARLINGTON HEIGHTS, IL 60005 (NAICS 323113). OSHA activity number 342413218.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch G and D Enterprises INC. for free Get an email when a new federal OSHA severe-injury report for G and D Enterprises INC. is published. One employer, no account, unsubscribe in one click.
Site address
1425 E. ALGONQUIN ROAD
City
ARLINGTON HEIGHTS
State
IL
ZIP
60005
Mailing
1425 E. ALGONQUIN ROAD, ARLINGTON HEIGHTS, IL 60005
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
323113
Employees
15
Ownership type
Private (A)

4 citations on file for this inspection.

1910.305 G01 IV C

Serious Gravity 1 1 instance 1 exposed
Issued
Sep 5, 2017
Abate by
Sep 15, 2017
Penalty
Initial $2,173 · Current $1,521 Reduced
29 CFR 1910.305(g)(1)(iv)(C): Flexible cords and cables were used where run through doorways, windows, or similar openings:    a) Embroidery Room - On June 21, 2017, the employer did not ensure a flexible cord used to power a Barudan Stitching Machine, model #BENT-ZQ-201U, serial #98Q292K, was not run through a doorway.
Recent events (2)
  • · I (S) $1521
  • · Z (S) $2173

1910.1200 E01

Other-than-serious 1 instance 1 exposed
Issued
Sep 5, 2017
Abate by
Oct 23, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:   a) Shop Area - On or about June 21, 2017, the employer did not develop or implement a written hazard communication program, in accordance with 29 CFR 1910.1200(e)(1) that would describe or include at least the following:  1) Requirement for labeling of containers of hazardous chemicals; 2) Safety data sheet availability; 3) Training of employees; 4) A complete list of hazardous chemicals known to be present in the workplace; 5) Methods to inform employees of the hazards on non-routine tasks; and 6) Methods to inform other employer(s) of safety data sheet availability; the labeling system and any precautionary measures to protect employees.  Employee(s) were exposed to hazardous chemicals, including Super 16 Paint Gun Cleaner (s-0170B) (contains toluene, 2-propanone, 2-butanone, 2-butoxyethanol, 2-methyl-4-pentanone, acetic acid, butyl ester, ethyl benzene, methanol, and xylene), and Crystal Clean 142 Mineral Spirits (contains distillates (petroleum), aliphatic).
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

1910.1200 F06 II

Other-than-serious 1 instance 1 exposed
Issued
Sep 5, 2017
Abate by
Oct 23, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(f)(6)(ii): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged, or marked with the product identifier and words, pictures, symbols, or combination thereof, which provide at least general information regarding the hazards of the chemicals and which, in conjunction with the other information immediately available to employees under the hazard communication program, would provide employees with the specific information regarding the physical and health hazards of the hazardous chemical(s) contained therein:     a) Screen Printing - On or about June 21, 2017, the employer did not ensure that each container of hazardous chemicals in the workplace, including a spray bottle of Super 16 Paint Gun Cleaner (s-0170B), was labeled with the identity of the chemical and the information regarding physical and health hazards of the hazardous chemicals contained therein.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

1910.1200 H01

Other-than-serious 1 instance 1 exposed
Issued
Sep 5, 2017
Abate by
Oct 23, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(1): Employees were not provided information and training as specified in 29 CFR 1910.1200(h)(1) and (2) on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard was introduced into their work area:     a) Shop Area - On or about June 21, 2017, the employer did not provide information and training to employees exposed to hazardous chemicals, including Super 16 Paint Gun Cleaner (s-0170B) (contains toluene, 2-propanone, 2-butanone, 2-butoxyethanol, 2-methyl-4-pentanone, acetic acid, butyl ester, ethyl benzene, methanol, and xylene), and Crystal Clean 142 Mineral Spirits (contains distillates (petroleum), aliphatic).   b) Shop Area - On or about June 21, 2017, the employer did not provide training to employees by December 1, 2013 on the revised Safety Data Sheet format and content, as well as the new labeling elements, as required by the revised 2012 hazard communication standard, 29 CFR 1910.1200.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 342413218.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.