FAIRFIELD, CT —
OSHA Inspection: PERFORMANCE CARPENTRY, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of PERFORMANCE CARPENTRY, LLC in 2131 FAIRFIELD BEACH AVENUE, FAIRFIELD, CT 06824 (NAICS 238130). OSHA activity number 342430618.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PERFORMANCE CARPENTRY, LLC
- Site address
- 2131 FAIRFIELD BEACH AVENUE
- City
- FAIRFIELD
- State
- CT
- ZIP
- 06824
- Mailing
- 28 HIGH STREET, DANBURY, CT 06810
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 5
- Ownership type
- A
Citations
6 citations on file for this inspection.
1903.19 C01
- Issued
- Nov 16, 2017
- Abate by
- Dec 1, 2017
- Penalty
- Initial $305 · Current $305
General-duty citation text
29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated: Location: 2131 Fairfield Beach Avenue, Fairfield, CT 06824 a) Abatement certification and documentation for Citation 01, Item 002b was not received within 10 calendar days (by October 23, 2017) following the abatement due date (October 13, 2017). b) Abatement certification and documentation for Citation 01, Item 003b was not received within 10 calendar days (by October 23, 2017) following the abatement due date (October 13, 2017).
Recent events (1)
- — Z (O) $305
1926.405 G01 I
- Issued
- Sep 18, 2017
- Penalty
- Initial $2,716 · Current $2,716
General-duty citation text
29 CFR 1926.405(g)(1)(i): Permitted use. Flexible cords and cables shall be suitable for conditions of use and location: Jobsite: The flexible extension cord, that was used to provide power to the jobsite ran across the street and was exposed to physical damage; the outer sheathing was frayed exposing the internal conductors.
Recent events (1)
- — Z (S) $2716
1926.501 B13
- Issued
- Sep 18, 2017
- Penalty
- Initial $2,173 · Current $2,173
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): Jobsite: The employees who were working on the first floor were not protected from fall hazards by the use guardrails, safety nets or personal fall arrest systems.
Recent events (1)
- — Z (S) $2173
1926.503 A01
- Issued
- Sep 18, 2017
- Abate by
- Oct 13, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards: Jobsite: The employees who were exposed fall hazards while working on the first floor deck roof were not trained in fall hazards and the procedures to be followed to minimize such hazards.
Recent events (1)
- — Z (S) $0
1926.1053 B01
- Issued
- Sep 18, 2017
- Penalty
- Initial $1,847 · Current $1,847
General-duty citation text
29 CFR 1926.1053(b)(1): Where (a) portable ladder(s) was/were used for access to an upper level landing surface and the ladder's length did not allow the ladder side rails to extend at least 3 feet (0.9 m) above the upper landing surface being accessed, the ladder was not secured at its top to a rigid support that will not deflect, and/or a grasping device was not provided to assist employees in mounting and dismounting the ladder. Jobsite: The side rails of the 22 feet Louisville aluminum ladder that was used to gain access to the first floor deck did not extend at least 3 feet above the landing surface.
Recent events (1)
- — Z (S) $1847
1926.1060 A
- Issued
- Sep 18, 2017
- Abate by
- Oct 13, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1060(a): The employer did not provide a training program for each employee using ladders and stairways, as necessary, which would enable each employee to recognize hazards related to ladders and stairways and train each employee in the procedures to be followed to minimize these hazards. Jobsite: The employees who were using a ladder were not trained by a competent person in the proper procedures to minimize the hazards associated with ladders.
Recent events (1)
- — Z (S) $0
More inspections at Performance Carpentry, LLC
View Performance Carpentry, LLC's full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in CT
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342430618.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.