COLORADO SPRINGS, CO ·
OSHA Inspection: HALL'S CUSTOM WOODWORKS, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of HALL'S CUSTOM WOODWORKS, LLC in 2135 BROADWAY UNIT C, COLORADO SPRINGS, CO 80904 (NAICS 321999). OSHA activity number 342440229.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HALL'S CUSTOM WOODWORKS, LLC
- Site address
- 2135 BROADWAY UNIT C
- City
- COLORADO SPRINGS
- State
- CO
- ZIP
- 80904
- Mailing
- 2135 BROADWAY UNIT C, COLORADO SPRINGS, CO 80904
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321999
- Employees
- 14
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
1910.213 C01
- Issued
- Aug 8, 2017
- Abate by
- Aug 18, 2017
- Penalty
- Initial $2,897 · Current $1,500 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: a) On or about June 28, 2017, and at times prior, the employer, Halls Custom Woodworks, LLC, did not ensure employees were protected from blade contact hazards while operating a Delta Unisaw (table saw) which was not equipped with a hood guard.
Recent events (2)
- · I (S) $1500
- · Z (S) $2897
1910.213 C02
- Issued
- Aug 3, 2017
- Abate by
- Aug 15, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: a) On or about June 28, 2017, and at times prior, the employer, Halls Custom Woodworks, LLC, did not ensure employees were protected from stuck-by hazards while operating and working in the vicinity of a Delta Unisaw (table saw) without a spreader device.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.213 C03
- Issued
- Aug 3, 2017
- Abate by
- Aug 15, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: a) On or about June 28, 2017, and at times prior, the employer, Halls Custom Woodworks, LLC, did not ensure employees were protected from kickback hazards while operating and working in the vicinity of a Delta Unisaw (table saw) which was not equipped with non-kickback fingers.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.37 B02
- Issued
- Aug 3, 2017
- Abate by
- Aug 15, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit": a) On or about June 28, 2017, and at times prior, the employer, Halls Custom Woodworks, LLC, did not ensure the production area exit was appropriately marked and clearly visible.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections in this industry (NAICS 321999)
More inspections in CO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 342440229.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.