SAINT LOUIS, MO —
OSHA Inspection: SAK CONSTRUCTION, LLC
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of SAK CONSTRUCTION, LLC in 7727 HORATIO DRIVE, SAINT LOUIS, MO 63121 (NAICS 237110). OSHA activity number 342443033.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SAK CONSTRUCTION, LLC
- Site address
- 7727 HORATIO DRIVE
- City
- SAINT LOUIS
- State
- MO
- ZIP
- 63121
- Mailing
- 864 HOFF ROAD, O FALLON, MO 63366
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 237110
- Employees
- 450
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.20 B01
- Issued
- Oct 27, 2017
- Penalty
- Initial $12,675 · Current $0 Reduced
General-duty citation text
29 CFR 1926.20(b)(1): The employer did not initiate and maintain accident prevention programs as necessary to comply with this part: On or about June 22, 2017, at the jobsite located near 7727 Horatio Drive, Saint Louis, Missouri, the employer did not initiate and maintain training programs that adequately provided guidance to ensure the prevention of exposure to amputation hazard(s). An employee sustained an amputation to the tip of the ring finger of the right hand while operating the IST Reel (Make: Ritec; Model: Motorized Cable Reel XXL; S/N: 81).
Recent events (2)
- — I (S) $0
- — Z (S) $12675
1926.20 B02
- Issued
- Oct 27, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.20(b)(2): Such programs did not provide for frequent and regular inspections of the job sites, materials, and equipment to be made by competent persons designated by the employers. On or about June 22, 2017, at the jobsite located near 7727 Horatio Drive, Saint Louis, Missouri, the employer did not provide for adequate frequent and regular inspections of the job site. An employee sustained an amputation to the tip of the ring finger of the right hand while operating the IST Reel (Make: Ritec; Model: Motorized Cable Reel XXL; S/N: 81) with a missing guard that went unidentified by the designated competent person.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.300 B02
- Issued
- Oct 27, 2017
- Penalty
- Initial $12,675 · Current $12,675
General-duty citation text
29 CFR 1926.300(b)(2): Belts, gears, shafts, pulleys, sprockets, spindles, drums, fly wheels, chains, or other reciprocating, rotating or moving parts of equipment were not guarded when such parts were exposed to contact by employees or otherwise created a hazard: On or about June 22, 2017, at the jobsite located near 7727 Horatio Drive, Saint Louis, Missouri, the employer did not ensure the chain and sprocket were guarded on the IST Reel (Make: Ritec; Model: Motorized Cable Reel XXL; S/N: 81) mounted in the company truck (US DOT 171 4460; TVK 116). An employee sustained an amputation to the tip of the ring finger of the right hand while operating the reel.
Recent events (2)
- — I (O) $12675
- — Z (S) $12675
1926.300 B03
- Issued
- Oct 27, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.300(b)(3): "Types of guarding." One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are - barrier guards, two-hand tripping devices, electronic safety devices, etc. On or about June 22, 2017, at the jobsite located near 7727 Horatio Drive, Saint Louis, Missouri, the employer did not ensure the chain and sprocket were guarded on the IST Reel (Make: Ritec; Model: Motorized Cable Reel XXL; S/N: 81) mounted in the company truck (US DOT 171 4460; TVK 116). An employee sustained an amputation to the tip of the ring finger of the right hand while operating the reel.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at SAK Construction, LLC
View SAK Construction, LLC's full OSHA safety record →
More inspections in this industry (NAICS 237110)
More inspections in MO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342443033.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.