GARLAND, TX —
OSHA Inspection: J & A MANUFACTURING, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of J & A MANUFACTURING, INC. in 2805 EAST CENTERVILLE ROAD, GARLAND, TX 75040 (NAICS 332999). OSHA activity number 342461936.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- J & A MANUFACTURING, INC.
- Site address
- 2805 EAST CENTERVILLE ROAD
- City
- GARLAND
- State
- TX
- ZIP
- 75040
- Mailing
- 2805 EAST CENTERVILLE ROAD, GARLAND, TX 75040
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 52
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.22 D01
- Issued
- Oct 19, 2017
- Penalty
- Initial $6,338 · Current $0 Reduced
General-duty citation text
29 CFR 1910.22(d)(1): In every building or other structure, or part thereof, used for mercantile, business, industrial, or storage purposes, the loads approved by the building official were not marked on plates of approved design which were not supplied and securely affixed by the owner of the building, or his duly authorized agent, in a conspicuous place in each space to which they relate: a) On or about July 19, 2017; where employees were exposed to crushed by hazards while working under areas where overhead storage had not been rated to determine its maximum load capacity: 1) In the storage room; 2) Packaging room; 3) maintenance room; and 4) The tool crib for punch department
Recent events (2)
- — I (S) $0
- — Z (S) $6338
1910.147 C04 I
- Issued
- Oct 19, 2017
- Abate by
- Nov 24, 2017
- Penalty
- Initial $8,873 · Current $3,550 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and/or utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) On or about July 19, 2017; where employees did not utilize the companies energy control program while working on equipment with multiple sources of energy.
Recent events (2)
- — I (S) $3550
- — Z (S) $8873
1910.178 L01
- Issued
- Oct 19, 2017
- Abate by
- Oct 31, 2017
- Penalty
- Initial $8,873 · Current $3,550 Reduced
General-duty citation text
29 CFR 1910.178(l)(1): The employer did not ensure that each power industrial truck operator was competent to operate a power industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in paragraph (1): a) On or about July 19, 2017; where employees operated powered industrial trucks without having first completed training consisting of formal instruction, practical training, and an evaluation of the operators performance in the workplace.
Recent events (2)
- — I (O) $3550
- — Z (S) $8873
1910.212 A01
- Issued
- Oct 19, 2017
- Penalty
- Initial $6,338 · Current $2,550 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips: a) On or about July 19, 2017, where employees were exposed to struck-by hazards while operating drill presses that were not equipped with guards.
Recent events (2)
- — I (S) $2550
- — Z (S) $6338
1910.212 A03 II
- Issued
- Oct 19, 2017
- Abate by
- Oct 31, 2017
- Penalty
- Initial $8,873 · Current $0 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): The point of operation of machines whose operation exposed an employee to injury, was not guarded: a) O or about July 19, 2017, where employees are not protected from placing their fingers, hand, or other body parts into the point of operation of the Omada press brake machine.
Recent events (2)
- — I (S) $0
- — Z (S) $8873
1910.243 B02
- Issued
- Oct 19, 2017
- Penalty
- Initial $6,338 · Current $2,542 Reduced
General-duty citation text
29 CFR 1910.243(b)(2): Airhose. Hose and hose connections used for conducting compressed air to utilization equipment were not designed for the pressure and service to which they are subjected: a) On or about July 19, 2017, where employees were exposed to struck-by hazards while operating pneumatic air hoses with clamps that were not rated for the pressure that was being serviced.
Recent events (2)
- — I (S) $2542
- — Z (S) $6338
More inspections at J & a Manufacturing, INC.
View J & a Manufacturing, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342461936.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.