LINCOLN, NE —
OSHA Inspection: LINCOLN LUMBER CO., MILLWORK DIVISION
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of LINCOLN LUMBER CO., MILLWORK DIVISION in 2201 DUDLEY ST, LINCOLN, NE 68503 (NAICS 423310). OSHA activity number 342474665.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LINCOLN LUMBER CO., MILLWORK DIVISION
- Site address
- 2201 DUDLEY ST
- City
- LINCOLN
- State
- NE
- ZIP
- 68503
- Mailing
- 932 N 23RD STREET, LINCOLN, NE 68503
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Complete (A)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 423310
- Employees
- 19
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.213 H01
- Issued
- Oct 13, 2017
- Abate by
- Nov 8, 2017
- Penalty
- Initial $3,078 · Current $2,155 Reduced
General-duty citation text
29 CFR 1910.213(h)(1): The sides of the lower exposed portion of the blade of the radial saw were not guarded to the full diameter of the blade by a device that automatically adjusted itself to the thickness of the stock and remained in contact with the material being cut. The employer is failing to protect employees from amputation hazards when operating the radial arm saw. This was most recently documented in the door shop located at 2201 Dudley Street, Lincoln, NE 68503 on or about June 13th, 2017 when employees operated the Dewalt radial arm saw which is not guarded on the sides of the lower portion of the blade.
Recent events (2)
- — I (S) $2154.6
- — Z (S) $3078
1910.213 S06
- Issued
- Oct 13, 2017
- Penalty
- Initial $2,463 · Current $1,724 Reduced
General-duty citation text
29 CFR 1910.213(s)(6): Cleanliness around working machinery was not maintained to prevent fire hazards and ensure the effective functioning of guards: The employer is failing to protect employees from fire hazards when operating the Dewalt radial arm saw. This was most recently documented in the door shop located at 2201 Dudley Street, Lincoln, NE 68503 on or about June 13th, 2017 when combustible saw dust had accumulated on and around the radial arm saw's electrical controls, conduit, and junction box that supplies power to the saw.
Recent events (2)
- — I (S) $1724.1
- — Z (S) $2463
1910.305 B02 I
- Issued
- Oct 13, 2017
- Penalty
- Initial $2,093 · Current $1,465 Reduced
General-duty citation text
29 CFR 1910.305(b)(2)(i): Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy: The employer is failing to protect employees from electrical shock hazards when operating the light switches without a faceplate that completely encloses the front of the switch box. This was most recently documented in the restroom located at 2201 Dudley Street, Lincoln, NE 68503 on or about June 13th, 2017.
Recent events (2)
- — I (S) $1465.1
- — Z (S) $2093
1910.307 C
- Issued
- Oct 13, 2017
- Penalty
- Initial $2,463 · Current $1,724 Reduced
General-duty citation text
29 CFR 1910.307(c): Equipment, wiring methods, and installations of equipment in hazardous (classified) locations were not intrinsically safe, approved for the hazardous (classified) location, or safe for the hazardous (classified) location: The employer is failing to protect employees from fire hazards when operating the Dewalt radial arm saw. This was most recently documented in the door shop located at 2201 Dudley Street, Lincoln, NE 68503 on or about June 13th, 2017 where the conduit system and junction box providing power to the saw was not rated for the class II division II area where combustible saw dust had accumulated on the electrical equipment.
Recent events (2)
- — I (S) $1724.1
- — Z (S) $2463
1910.305 G02 III
- Issued
- Oct 13, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws: The employer is failing to ensure proper strain relief is provided on flexible cords used by employees. This was most recently documented in the door shop located at 2201 Dudley Street, Lincoln, NE 68503on or about July 13th, 2017 when employees were using an extension cord with damaged strain relief to provide power to a Porter Cable sheet sander.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 423310)
More inspections in NE
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342474665.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.