Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: METROPOLITAN WOODWORK, LLC

Follow-up inspection · Safety discipline

On , OSHA opened a follow-up safety inspection of METROPOLITAN WOODWORK, LLC in 5 CORNELL PARKWAY, SPRINGFIELD, NJ 07081 (NAICS 337110). OSHA activity number 342482049.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Metropolitan Woodwork, LLC — free Get an email when a new federal OSHA severe-injury report for Metropolitan Woodwork, LLC is published. One employer, no account, unsubscribe in one click.
Site address
5 CORNELL PARKWAY
City
SPRINGFIELD
State
NJ
ZIP
07081
Mailing
5 CORNELL PARKWAY, SPRINGFIELD, NJ 07081
Inspection type
Follow-up (F)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
337110
Employees
20
Ownership type
A

5 citations on file for this inspection.

1910.107 B05 I

Serious Gravity 5 3 instances 5 exposed
Issued
Feb 13, 2018
Abate by
Mar 12, 2018
Penalty
Initial $3,252 · Current $3,252
29 CFR 1910.107(b)(5)(i): There were no visible gauges, audible alarms or pressure activated devices installed in paint spray booths to indicate or ensure that the required air speed was maintained.  a) Metropolitan Woodwork 5 Cornell Parkway, Springfield, NJ site - Manufacturing:  The gauges that were located on the DeVilbiss paint arrestor spray booths were not properly connected and did not indicate the face velocity of the spray booths.   Condition noted on or about 8/14/2017.
Recent events (1)
  • — Z (S) $3252

1910.215 A04

Serious Gravity 1 1 instance 1 exposed
Issued
Feb 13, 2018
Penalty
Initial $2,439 · Current $2,439
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch:   a) Metropolitan Woodwork 5 Cornell Parkway, Springfield, NJ site - Manufacturing:  The work rest located on the BOSCH 6 in. pedestal bench grinder Model#: 1961 Serial #: 065, was adjusted at a distance greater than 1 inch from the diameter of the abrasive wheel.   Condition noted on or about 08/14/2017.
Recent events (1)
  • — Z (S) $2439

1910.215 B09

Serious Gravity 5 1 instance 1 exposed
Issued
Feb 13, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.215(b)(9): Guard for abrasive wheel machine where the operator stands in front of the machine was not constructed so that the peripheral protecting member could be adjusted to the constantly decreasing diameter of the wheel:  a) Metropolitan Woodwork 5 Cornell Parkway, Springfield, NJ site - Manufacturing:  The BOSCH 6 in. pedestal bench grinder Model#: 1961 Serial #: 065, tongue guards were not adjusted to the decreasing diameter of the abrasive wheel, no more than 1/4inch.   Condition noted on or about 08/14/2017.
Recent events (1)
  • — Z (S) $0

1910.1200 G01

Repeat Gravity 1 1 instance 10 exposed
Issued
Feb 13, 2018
Abate by
Mar 5, 2018
Penalty
Initial $4,878 · Current $4,878
29 CFR 1910.1200(g)(1): The employer did not have a material safety data sheet for each hazardous chemical in use:  a) Metropolitan Woodwork 5 Cornell Parkway, Union, NJ site - Paint Room:  Material Safety Data Sheets (MSDS) for hazardous chemicals such as but not limited to Lacquer Thinner, Formica Premium Spray Glue Contact Adhesive, and TiteBond Wood Glue.  Condition noted on or about 08/14/2017.  The Metropolitan Woodwork, LLC was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.1200(g)(1), which was contained in OSHA inspection number 1188746, citation number 1,  item number 4c and was affirmed as a final order on 5/25/2017, with respect to a workplace located at 5 Cornell Parkway, Springfield, NJ 07081.
Recent events (1)
  • — Z (R) $4878

1910.303 G01 II

Other-than-serious 1 instance 5 exposed
Issued
Feb 13, 2018
Abate by
Mar 12, 2018
Penalty
Initial $456 · Current $456
29 CFR 1910.303(g)(1)(ii):  The required working space about electric equipment rated 600 volts, nominal, or less to ground, was used for storage:   a) Metropolitan Woodwork 5 Cornell Parkway, Springfield, NJ site - Metal Shop:   Electrical panel boxes rated 480V/ 3 phase and 220V / single phase that control the main power to Delta machinery and the ventilation system  located in the  metal shop area were blocked by machinery and other stored materials.    Condition noted on or about 08/14/2017.
Recent events (1)
  • — Z (O) $456

View Metropolitan Woodwork, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342482049.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.