ROXBURY CROSSING, MA ·
OSHA Inspection: SALAMI'S TRUCK CENTER. INC
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of SALAMI'S TRUCK CENTER. INC in 24 NORFOLK AVE, ROXBURY CROSSING, MA 02120 (NAICS 811111). OSHA activity number 342496114.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SALAMI'S TRUCK CENTER. INC
- Site address
- 24 NORFOLK AVE
- City
- ROXBURY CROSSING
- State
- MA
- ZIP
- 02120
- Mailing
- 124 NORFOLK AVE, ROXBURY CROSSING, MA 02120
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811111
- Employees
- 15
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1910.178 L04 III
- Issued
- Aug 15, 2017
- Abate by
- Oct 4, 2017
- Penalty
- Initial $2,463 · Current $1,232 Reduced
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: Shop: All forklift operators had not been evaluated every three years.
Recent events (2)
- · I (S) $1231.5
- · Z (S) $2463
1910.178 P01
- Issued
- Aug 15, 2017
- Abate by
- Oct 4, 2017
- Penalty
- Initial $1,847 · Current $924 Reduced
General-duty citation text
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition(s) Shop: a) The Otis and Clarke forklifts- Horns not operational. b) The Otis forklift-The clamps used to hold the propane tank were missing
Recent events (2)
- · I (S) $923.5
- · Z (S) $1847
1910.215 A04
- Issued
- Aug 15, 2017
- Penalty
- Initial $2,093 · Current $1,047 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: Shop: a) Baldor bench grinder: There was no work rest at the abrasive wheel. b) Dewalt Bench Grinder: The work rest was not adjusted to 1/4 inch to the abrasive wheel.
Recent events (2)
- · I (S) $1046.5
- · Z (S) $2093
1910.215 B09
- Issued
- Aug 15, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: Shop: a) The Black Bench Grinder: There was no tongue guard adjusted to 1/4 inch from the abrasive wheel. b) Dewalt Bench: The tongue guard was install incorrectly and was not adjusted to 1/4 inch from the abrasive wheel.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.1200 E01
- Issued
- Aug 15, 2017
- Abate by
- Oct 4, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f) labeling, (g) safety data sheets, and (h) information and training will be met: Shop: A written hazard communication program was not developed and implemented where automotive chemical products, welding/cutting gases, fuels for forklift were used.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections in this industry (NAICS 811111)
More inspections in MA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 342496114.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.