RIVIERA BEACH, FL ·
OSHA Inspection: AMERICAN YACHT RESTORATION INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of AMERICAN YACHT RESTORATION INC. in 5770 COLUMBIA CIRCLE, RIVIERA BEACH, FL 33407 (NAICS 337215). OSHA activity number 342498987.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AMERICAN YACHT RESTORATION INC.
- Site address
- 5770 COLUMBIA CIRCLE
- City
- RIVIERA BEACH
- State
- FL
- ZIP
- 33407
- Mailing
- 5770 COLUMBIA CIRCLE, RIVIERA BEACH, FL 33407
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 337215
- Employees
- 14
- Ownership type
- Private (A)
Citations
6 citations on file for this inspection.
1910.213 C01
- Issued
- Oct 3, 2017
- Abate by
- Oct 18, 2017
- Penalty
- Initial $5,070 · Current $3,042 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: On or about 7/26/2017, at the shop area of the above addressed jobsite, employees were exposed to a caught by hazard while ripping wood with a table saw (Grizzly Industrial, Model G1023SLWX) that lacked a guard over the blade.
Recent events (2)
- · I (S) $3042
- · Z (S) $5070
1910.213 C02
- Issued
- Oct 3, 2017
- Abate by
- Oct 18, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: On or about 7/26/2017, at the shop area of the above addressed jobsite, employees were exposed to a struck by hazard while ripping wood with a table saw (Grizzly Industrial, Model G1023SLWX) that lacked a spreader over the blade.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.213 C03
- Issued
- Oct 3, 2017
- Abate by
- Oct 18, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: On or about 7/26/2017, at the shop area of the above addressed jobsite, employees were exposed to a struck by hazard while ripping wood with a table saw (Grizzly Industrial, Model G1023SLWX) that lacked non-kickback fingers of dogs.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.213 D01
- Issued
- Oct 3, 2017
- Abate by
- Oct 18, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(d)(1): Circular handfed crosscut table saw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: On or about 7/26/2017, at the shop area of the above addressed jobsite, employees were exposed to a caught by hazard while crosscutting wood with a table saw (Grizzly Industrial, Model G1023SLWX) that lacked a guard over the blade.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.107 B09
- Issued
- Oct 3, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.107(b)(9): A clear space of not less than 3 feet on all sides was not kept free from storage or combustible construction: On or about 07/26/2017, at the finishing department of the above addressed jobsite, miscellaneous products and chemicals were stored against one of the sides of a spray booth.
Recent events (2)
- · I (O) $0
- · Z (O) $0
1910.1200 H02 III
- Issued
- Oct 3, 2017
- Abate by
- Oct 18, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(2)(iii): The employer did not provide information to the employees as to the location and availability of the written hazard communication program, and safety data sheets required by 29 CFR 1910.1200: On or about 7/26/2017, at the finishing department of the above address jobsite, employees that worked with hazardous chemicals as part of their daily work (i.e. Lacquer thinner, Denatured alcohol, etc.) were not informed of the location and availability of a hazard communication program and safety data sheets.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections in this industry (NAICS 337215)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 342498987.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.