WICHITA, KS —
OSHA Inspection: ROMERO'S CARPENTRY, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ROMERO'S CARPENTRY, LLC in 150 N MCLEAN, WICHITA, KS 67203 (NAICS 238130). OSHA activity number 342505179.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ROMERO'S CARPENTRY, LLC
- Site address
- 150 N MCLEAN
- City
- WICHITA
- State
- KS
- ZIP
- 67203
- Mailing
- 8510 SCOTT HAMILTON DR. LOT #19, LITTLE ROCK, AR 72209
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 2
- Ownership type
- A
Citations
4 citations on file for this inspection.
1903.19 C01
- Issued
- Nov 14, 2017
- Abate by
- Dec 4, 2017
- Penalty
- Initial $406 · Current $406
General-duty citation text
29 CFR 1903.19(c)(1): Within 10 calendar days after the abatement date, the employer must certify to OSHA (the Agency) that each cited violation has been abated, except as provided in paragraph (c)(2) of this section. The employer has not certified to OSHA the following items cited inspection #1250517 a) 29 CFR 1926.404(a)(c): Abatement was due 09/18/2017 b) 29 CFR 1926.404(f)(6): Abatement was due 09/18/2017 c) 29 CFR 1926.405(g)(iv): Abatement was due 09/18/2017
Recent events (1)
- — Z (O) $406
1926.404 A02
- Issued
- Aug 22, 2017
- Abate by
- Sep 18, 2017
- Penalty
- Initial $2,897 · Current $2,897
General-duty citation text
29 CFR 1926.404(a)(2): A grounded conductor was attached to a terminal or lead so as to reverse designated polarity: An employee engaged in framing activities was exposed to electrical shock hazards in that the ground conductor was attached to a terminal in a manner that reversed designated polarity.
Recent events (1)
- — Z (S) $2897
1926.404 F06
- Issued
- Aug 22, 2017
- Abate by
- Sep 18, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous: An employee engaged in framing activities was exposed to electrical shock hazards in that the path to ground from equipment was not permanent and continuous.
Recent events (1)
- — Z (S) $0
1926.405 G02 IV
- Issued
- Aug 22, 2017
- Abate by
- Sep 18, 2017
- Penalty
- Initial $2,897 · Current $2,897
General-duty citation text
29 CFR 1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws: An employee engaged in framing activities was exposed to electrical shock hazards in that the flexible cord was not connected to a device so that strain relief was provided.
Recent events (1)
- — Z (S) $2897
More inspections at Romero'S Carpentry, LLC
View Romero'S Carpentry, LLC's full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in KS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342505179.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.