OSHA Inspection: DEITERS MILLWORK, LLC

Issued

2017-10-13 00:00:00

Abate by

2017-10-19 00:00:00

Penalty

Initial $2716.00 · Current $1800.00 Reduced

General-duty citation text

29 CFR 1910.213(d)(1): Circular handfed crosscut table saw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut.    (a.) The Delta table saw located at the back of the shop was not guarded with a hood that would completely enclose the upper portion of the blade above the material being but.

Issued

2017-10-13 00:00:00

Abate by

2017-12-01 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.213(p)(4): Belt sanding machinery was not provided with a guard at each nip point where the sanding belt ran onto a pulley, to prevent the operator's hands or fingers from coming into contact with nip points.  (a) The Crouch belt sander does not have guards to prevent operators hands or fingers from coming in contact with nip points.

Issued

2017-10-13 00:00:00

Abate by

2017-10-19 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s).  (a) The 10 inch circular blade on the Makita miter saw Serial # 274024A was not guarded during the operating cycle. This exposed employees to amputation injuries.

Issued

2017-10-13 00:00:00

Abate by

2017-12-01 00:00:00

Penalty

Initial $1630.00 · Current $700.00 Reduced

General-duty citation text

29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met.    (a) The employer had not developed and implemented a written hazard communication program.

Issued

2017-10-13 00:00:00

Abate by

2017-12-01 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.1200(g)(8): The employer did not maintain copies of the required material safety data sheets for each hazardous chemical in the workplace.  (a) The employer did not have a safety data sheets for hazardous chemicals such as but not limited to Painter's Touch® 2X Ultra Cover®  2X Ultra Cover Primer Spray.

Issued

2017-10-13 00:00:00

Abate by

2017-12-01 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area.  (a) Employees were not provided with information and training from the employer regarding the use of hazardous chemicals that include but not limited to Painter's Touch® 2X Ultra Cover®  2X Ultra Cover Primer Spray.

Issued

2017-10-13 00:00:00

Abate by

2017-12-01 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l).  (a) The employer had not trained or evaluated each operator who is authorized to operate the Nissan Model MPALO2A25LV (power industrial truck) to ensure they were competent to operate the forklifts safely.

Issued

2017-10-13 00:00:00

Abate by

2017-12-01 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service.  (a) One Nissan Model MPALO2A25LV PIV was being used on a daily basis without being inspected before use by operators.