Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,197,549Inspections Most recent open 2026-08-27 Last loaded 2026-08-31

OSHA Inspection: ACS ROOFING, LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ACS ROOFING, LLC in 6419 DIXIE HWY, FAIRFIELD, OH 45014 (NAICS 238160). OSHA activity number 342535853.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch ACS Roofing, LLC for free Get an email when a new federal OSHA severe-injury report for ACS Roofing, LLC is published. One employer, no account, unsubscribe in one click.
Establishment
ACS ROOFING, LLC
Site address
6419 DIXIE HWY
City
FAIRFIELD
State
OH
ZIP
45014
Mailing
230 NORTHLAND BLVD STE 320, CINCINNATI, OH 45246
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
5
Ownership type
Private (A)

2 citations on file for this inspection.

1926.20 B02

Serious Gravity 10 2 instances 8 exposed
Issued
Aug 29, 2017
Abate by
Oct 17, 2017
Penalty
Initial $3,803 · Current $3,803
29 CFR 1926.20(b)(2): Such programs shall provide for frequent and regular inspections of the job sites, materials, and equipment to be made by competent persons designated by the employers.  a) On August 9, 2017, located throughout an exterior commercial structure, employees were installing shingles on a low slope pitch roof as there were no frequent and regular inspections being performed by a competent person to ensure the job-site, materials and equipment such as fall protection systems and/or devices were being maintained and utilized in a safe condition.  b) On August 11, 2017, located on the north side of an exterior commercial structure, employees were installing shingles on a low slope pitch roof as there were no frequent and regular inspections being performed by a competent person to ensure the job-site, materials and equipment such as fall protection systems and/or devices were being maintained and utilized in a safe condition.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (1)
  • · Z (S) $3803

1926.501 B10

Serious Gravity 10 2 instances 8 exposed
Issued
Aug 29, 2017
Penalty
Initial $3,803 · Current $3,803
29 CFR 1926.501(b)(10): "Roofing work on Low-slope roofs." Except as otherwise provided in paragraph (b) of this section, each employee engaged in roofing activities on low-slope roofs, with unprotected sides and edges 6 feet (1.8 m) or more above lower levels shall be protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system. Or, on roofs 50-feet (15.25 m) or less in width (see Appendix A to subpart M of this part), the use of a safety monitoring system alone [i.e. without the warning line system] is permitted.  a) On August 9, 2017, located throughout an exterior commercial structure, employees were observed installing shingles on a low slope pitch roof while not utilizing an adequate fall protection system. Potential Fall Heights were measured to be 8'-7" with a roof pitch of 4/12.  b) On August 11, 2017, located on the north side of an exterior commercial structure, employees were observed installing shingles on a low pitch slope roof while not utilizing an adequate fall protection system. Potential Fall Heights were measured to be 8'-7" with a roof pitch of 4/12.
Recent events (1)
  • · Z (S) $3803

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 342535853.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.