Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,194,531Inspections Most recent open 2026-08-11 Last loaded 2026-08-14

OSHA Inspection: FELIPE'S FRAMING, LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of FELIPE'S FRAMING, LLC in 2861 EAST LAKESHORE, BATON ROUGE, LA 70808 (NAICS 238130). OSHA activity number 342548757.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Felipe'S Framing, LLC for free Get an email when a new federal OSHA severe-injury report for Felipe'S Framing, LLC is published. One employer, no account, unsubscribe in one click.
Site address
2861 EAST LAKESHORE
City
BATON ROUGE
State
LA
ZIP
70808
Mailing
160 JASMINE DR., THIBODAUX, LA 70301
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
13
Ownership type
Private (A)

4 citations on file for this inspection.

1926.451 C02 III

Serious Gravity 5 1 instance 1 exposed
Issued
Nov 7, 2017
Abate by
Nov 20, 2017
Penalty
Initial $2,897 · Current $1,738 Reduced
29 CFR 1926.451(c)(2)(iii): Unstable objects were used as working platforms:     On or about 08/15/2017, at 2861 East Lakeshore, Baton Rouge, LA, an employee was conducting framing work from a job made scaffold platform that was supported by unstable wooden materials at a height of approximately 6 feet to the concrete floor.
Recent events (2)
  • · I (S) $1738.2
  • · Z (S) $2897

1926.501 B13

Serious Gravity 5 1 instance 4 exposed
Issued
Nov 7, 2017
Penalty
Initial $2,897 · Current $1,738 Reduced
29 CFR 1926.501(b)(13): "Residential construction." Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels shall be protected by guardrail systems, safety net system, or personal fall arrest system unless another provision in paragraph (b) of this section provides for an alternative fall protection measure:    On or about 08/15/2017, at 2861 East Lakeshore, Baton Rouge, LA, employees were conducting frame work on the roof of a residential home at a height of approximately 14 feet without a means of fall protection.
Recent events (2)
  • · I (S) $1738.2
  • · Z (S) $2897

1926.1053 B04

Serious Gravity 5 1 instance 1 exposed
Issued
Nov 7, 2017
Abate by
Nov 20, 2017
Penalty
Initial $2,897 · Current $1,738 Reduced
29 CFR 1926.1053(b)(4): Ladder(s) were used for purposes other than the purpose for which they were designed:    On or about 2861 East Lakeshore, Baton Rouge, LA, employees were using A-frame ladders for scaffolding to conduct framing work in a house.
Recent events (2)
  • · I (S) $1738.2
  • · Z (S) $2897

1926.302 E03

Other-than-serious 1 instance 1 exposed
Issued
Nov 7, 2017
Abate by
Nov 20, 2017
Penalty
Initial $0 · Current $0
29 CFR 1926.302(e)(3): Any tool found not in proper working order, or that develops a defect during use, shall be immediately removed from service and not used until properly repaired:  On or about 08/15/2017, at 2681 East Lakeshore, Baton Rouge, LA, an employee was using a saw to cut framing material and the shrink-wrap on the saw's electrical cord had exposed wiring.
Recent events (2)
  • · I (O) $0
  • · Z (O) $0

View Felipe'S Framing, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 342548757.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.