WASHINGTON, DC ·
OSHA Inspection: 1344 MARYLAND AVENUE, LLC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of 1344 MARYLAND AVENUE, LLC. in 1344 MARYLAND AVENUE, NE, WASHINGTON, DC 20002 (NAICS 236118). OSHA activity number 342558467.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- 1344 MARYLAND AVENUE, LLC.
- Site address
- 1344 MARYLAND AVENUE, NE
- City
- WASHINGTON
- State
- DC
- ZIP
- 20002
- Mailing
- 1501 11TH STREET, NW, WASHINGTON, DC 20001
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 236118
- Employees
- 7
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1926.102 A05 I
- Issued
- Sep 29, 2017
- Abate by
- Oct 5, 2017
- Penalty
- Initial $5,070 · Current $2,000 Reduced
General-duty citation text
29 CFR 1926.102(a)(5)(i): They employer did not provide adequate eye protection against the particular hazards for which they are designed: a) Fourth Floor Stairway - Two employees were attaching the top rail of a standard guardrail system at a stairway opening while using a pneumatic nail gun and not wearing eye protection. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet).
Recent events (3)
- · F (S) $2000
- · C (S) $5070
- · Z (S) $5070
1926.404 F06
- Issued
- Sep 29, 2017
- Abate by
- Oct 5, 2017
- Penalty
- Initial $3,802 · Current $1,450 Reduced
General-duty citation text
29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous: a) Third Floor - An employee was using a DeWalt portable electric circular saw, model number DW369, serial number 530040, to cut wood framing members and the flexible extension cord was missing the ground pin, 120 volt service, on or about 08/16/2017. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet).
Recent events (3)
- · F (S) $1450
- · C (S) $3802
- · Z (S) $3802
1926.405 G02 IV
- Issued
- Sep 29, 2017
- Abate by
- Oct 5, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws: a) Third Floor - An employee was using a DeWalt portable electric circular saw, model number DW369, serial number 530040, and the plug was showing a strain where it entered the handle, 120 volt service, on or about 08/16/2017. b) Third Floor - An employee was using a DeWalt portable electric circular saw, model number DW369, serial number 530040, to cut wood framing members and the flexible extension cord was showing signs of a strain on the female end of the cord, on or about 08/16/2017. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet).
Recent events (3)
- · F (S) $0
- · C (S) $0
- · Z (S) $0
1926.503 A02 II
- Issued
- Sep 29, 2017
- Abate by
- Oct 5, 2017
- Penalty
- Initial $6,338 · Current $2,500 Reduced
General-duty citation text
29 CFR 1926.503(a)(2)(ii): The employer did not assure that each employee had been trained, as necessary, by a competent person qualified in the use and operation of guardrail systems, personal fall arrest systems, safety net systems, warning line systems, safety monitoring systems, controlled access zones, and other protection to be used: a) Temporary Floor Level - Employees were preparing to set an exterior wall framing member was not wearing fall protection and training had not been provided, while exposed to a fall hazard of 42-feet, on or about 08/16/2017. b) Third Floor Stairway - Employees were installing a guardrail around the open edge of a stairway and exposed to a fall hazard of 32-feet to the exterior of the building, on or about 08/16/2017. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet).
Recent events (3)
- · F (S) $2500
- · C (S) $6338
- · Z (S) $6338
1926.1053 B04
- Issued
- Sep 29, 2017
- Abate by
- Oct 5, 2017
- Penalty
- Initial $3,802 · Current $1,450 Reduced
General-duty citation text
29 CFR 1926.1053(b)(4): Ladder(s) were used for purposes other than the purpose for which they were designed: a) Temporary Floor Level - An employee was standing on a Werner portable 8 foot portable step ladder that was leaning up against a wall while preparing to install a wooden framing member, on or about 08/16/2017. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the Certification of Corrective Action Worksheet).
Recent events (3)
- · F (S) $1450
- · C (S) $3802
- · Z (S) $3802
More inspections in this industry (NAICS 236118)
More inspections in DC
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 342558467.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.