BATON ROUGE, LA —
OSHA Inspection: HIGHLAND CABINETS & MILLWORKS, INC
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of HIGHLAND CABINETS & MILLWORKS, INC in 15717 PERKINS ROAD, BATON ROUGE, LA 70810 (NAICS 321918). OSHA activity number 342559309.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HIGHLAND CABINETS & MILLWORKS, INC
- Site address
- 15717 PERKINS ROAD
- City
- BATON ROUGE
- State
- LA
- ZIP
- 70810
- Mailing
- 15717 PERKINS ROAD, BATON ROUGE, LA 70810
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321918
- Employees
- 28
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.95 C01
- Issued
- Nov 16, 2017
- Abate by
- Dec 1, 2017
- Penalty
- Initial $3,802 · Current $1,901 Reduced
General-duty citation text
29 CFR 1910.95(c)(1): The employer did not administer a continuing, effective hearing conservation program as described in 29 CFR 1910.95(c) through (o) whenever employee noise exposures equal or exceed an 8-hour time-weighted average sound level of 85 decibels measured on the A scale, or equivalently a dose of fifty percent: On or about August 17, 2017, at Highland Cabinets & Millworks, Inc., the employer did not implement an effective Hearing Conservation Program, and all of its elements, to protect employee's hearing as they performed tasks that exposed them to an 8-hour time-weighted average sound of 85 dBA or greater. (a) The employer allowed an employee in the Molding department to be exposed to noise at an 8-hour time-weighted average sound of 89.3 dBA during the 480 minute sampling period. Zero exposure was assumed for the remaining 7 minutes.
Recent events (2)
- — I (S) $1901
- — Z (S) $3802
1910.147 C04 II B
- Issued
- Nov 16, 2017
- Abate by
- Dec 1, 2017
- Penalty
- Initial $5,070 · Current $500 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii)(B): The energy control procedures did not clearly and specifically outline the steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy. On or about August 17, 2017, at Highland Cabinets & Millworks, Inc., the employer failed to develop a specific energy control procedure for shutting down, isolating, locking, and securing the multi-powered Doucet Clamp Carrier (Model SRX), which uses electric, pneumatic and hydraulic energy sources.
Recent events (2)
- — I (O) $500
- — Z (S) $5070
1910.1200 E01
- Issued
- Nov 16, 2017
- Abate by
- Dec 1, 2017
- Penalty
- Initial $3,802 · Current $0 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: On or about August 17, 2017, at Highland Cabinets & Millworks, Inc., the employer did not develop and implement a written Hazard Communication Program for employees who were exposed to hazardous substances in the workplace including, but not limited to DAP Weldwood Contact Adhesive, Bates Bootcoating/Glue Release, and Wood/Untreated Lumber.
Recent events (2)
- — I (S) $0
- — Z (S) $3802
1910.1200 H01
- Issued
- Nov 16, 2017
- Abate by
- Dec 1, 2017
- Penalty
- Initial $3,802 · Current $0 Reduced
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: On or about August 17, 2017, at Highland Cabinets & Millworks, Inc., the employer failed to train employees on the health hazards associated with chemicals used, but not limited to DAP Weldwood Contact Adhesive, Bates Bootcoating/Glue Release, and Wood/Untreated Lumber.
Recent events (2)
- — I (S) $0
- — Z (S) $3802
More inspections at Highland Cabinets & Millworks, INC
View Highland Cabinets & Millworks, INC's full OSHA safety record →
More inspections in this industry (NAICS 321918)
More inspections in LA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342559309.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.