OMAHA, NE ·
OSHA Inspection: THE SALVATION ARMY
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of THE SALVATION ARMY in 2551 DODGE ST., OMAHA, NE 68131 (NAICS 624310). OSHA activity number 342573326.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- THE SALVATION ARMY
- Site address
- 2551 DODGE ST.
- City
- OMAHA
- State
- NE
- ZIP
- 68131
- Mailing
- 2551 DODGE ST., OMAHA, NE 68131
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 624310
- Employees
- 20
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1910.176 B
- Issued
- Jan 16, 2018
- Abate by
- Feb 20, 2018
- Penalty
- Initial $9,239 · Current $6,000 Reduced
General-duty citation text
29 CFR 1910.176(b): Material stored in tiers was not stacked, blocked, interlocked or limited in height so that it was stable and secure against sliding and collapse: The employer is failing to protect employees from struck by hazards when working in a warehouse. This was most recently documented at 2551 Dodge St, Omaha, Nebraska on or about September 26, 2017 when gaylord shipping boxes were observed stacked 3-5 high so that they were not stable and secure, exposing employees to struck by and crushing hazards.
Recent events (2)
- · I (S) $6000
- · Z (S) $9239
1910.178 L01 II
- Issued
- Jan 16, 2018
- Abate by
- Feb 20, 2018
- Penalty
- Initial $7,391 · Current $4,500 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(ii) The employer did not ensure that each operator had successfully completed the training required by paragraph (l), except as permitted by paragraph (l)(5), prior to permitting an employee to operate a powered industrial truck: The employer is failing to protect employees from a struck by hazard when operating powered industrial trucks. This was most recently observed at 2551 Dodge St, Omaha, Nebraska on or about September 26, 2017 when employees were operating forklifts and they had not successfully completed the required training.
Recent events (2)
- · I (S) $4500
- · Z (S) $7391
1910.178 Q01
- Issued
- Jan 16, 2018
- Abate by
- Feb 20, 2018
- Penalty
- Initial $7,391 · Current $3,500 Reduced
General-duty citation text
29 CFR 1910.178(q)(1): Any power-operated industrial truck not in safe operating condition was not taken out of service, and/or repairs were not made by authorized personnel: The employer is failing to protect employees from struck by hazards when working in or around forklifts. This was most recently documented at 2551 Dodge St, Omaha, Nebraska on or about September 26, 2017 when a forklift was observed with missing pedal grip pads on both its clutch pedal and brake pedal.
Recent events (2)
- · I (S) $3500
- · Z (S) $7391
1910.178 Q07
- Issued
- Jan 16, 2018
- Abate by
- Feb 20, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service: The employer is exposing employees to struck by hazards while operating forklifts in a warehouse. This was most recently documented at 2551 Dodge St, Omaha, Nebraska when forklifts were being operated on a daily basis but were not being inspected prior to use.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.212 A01
- Issued
- Jan 16, 2018
- Penalty
- Initial $12,934 · Current $8,000 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: The employer is failing to protect employees from caught in hazards when operating a vertical baler. This was most recently documented at 2551 Dodge St, Omaha, Nebraska on or about 26 September, 2017 when a vertical baler was observed that did not have a safety gate installed. The safety gate includes a safety interlock designed to prevent operation of the baler if the gate is open or removed.
Recent events (2)
- · I (S) $8000
- · Z (S) $12934
More inspections at The Salvation Army
View The Salvation Army's full OSHA safety record →
More inspections in this industry (NAICS 624310)
More inspections in NE
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 342573326.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.