NEW CUMBERLAND, PA ·
OSHA Inspection: PS HILL LANDSCAPING
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of PS HILL LANDSCAPING in 108 DILLER ROAD, NEW CUMBERLAND, PA 17070 (NAICS 238910). OSHA activity number 342578101.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PS HILL LANDSCAPING
- Site address
- 108 DILLER ROAD
- City
- NEW CUMBERLAND
- State
- PA
- ZIP
- 17070
- Mailing
- 750 SHEEPBRIDGE ROAD, YORK HAVEN, PA 17370
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238910
- Employees
- 2
- Ownership type
- A
Citations
5 citations on file for this inspection.
1926.651 C02
- Issued
- Sep 12, 2017
- Abate by
- Oct 6, 2017
- Penalty
- Initial $2,716 · Current $2,227 Reduced
General-duty citation text
29 CFR 1926.651(c)(2): A stairway, ladder, ramp or other safe means of egress was not located in trench excavations that were 4 feet (1.22m) or more in depth so as to require no more than 25 feet (7.62m) of lateral travel for employees: (a) FRONT YARD - Employees entered and exited the ten foot deep trench by using a Werner eight foot step ladder to climb to the six foot bench that had been cut into the side of the trench, and then subsequently manually climbed the remaining four foot vertical side, thereby exposing the employee(s) to possible injury, on or about August 24, 2017. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- · I (S) $2227
- · Z (S) $2716
1926.651 J02
- Issued
- Sep 12, 2017
- Abate by
- Oct 6, 2017
- Penalty
- Initial $2,716 · Current $0 Reduced
General-duty citation text
29 CFR 1926.651(j)(2): Protection was not provided by placing and keeping excavated or other materials or equipment at least 2 feet (.61m) from the edge of excavations, or by the use of retaining devices that were sufficient to prevent materials or equipment from falling or rolling into excavations, or by a combination of both if necessary: (a) FRONT YARD - Employees worked to install a four inch sewer line in an unprotected ten foot deep trench, and the employer had not ensured the spoil from the trench was kept at least two feet from the edge of the trench, thereby exposing the employee(s) to possible injury, on or about August 24, 2017. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- · I (S) $0
- · Z (S) $2716
1926.652 B02
- Issued
- Sep 12, 2017
- Abate by
- Oct 6, 2017
- Penalty
- Initial $3,803 · Current $3,314 Reduced
General-duty citation text
29 CFR 1926.652(b)(2): Maximum allowable slopes, and allowable configurations for sloping and benching systems, was not determined in accordance with the conditions and requirements set forth in Appendices A and B to this subpart: (a) REAR, SIDE AND FRONT YARD - Employees worked in a ten foot deep trench, and the bench that the employer had cut did not meet the requirements of benching or sloping systems for Type B or Type C soil, which thereby exposed employee(s) to possible injuries, on or about August 25, 2017. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- · I (S) $3314
- · Z (S) $3803
1926.1053 B01
- Issued
- Sep 12, 2017
- Abate by
- Oct 6, 2017
- Penalty
- Initial $2,716 · Current $2,227 Reduced
General-duty citation text
29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed: (a) FRONT YARD - Employees entered and exited the trench by using a Werner eight foot step ladder to climb to the six foot bench that had been cut into the side of the trench, and the ladder only extended two feet past the upper bench surface, thereby exposing the employee(s) to possible injury, on or about August 24, 2017. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- · I (S) $2227
- · Z (S) $2716
1926.1053 B04
- Issued
- Sep 12, 2017
- Abate by
- Oct 6, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1053(b)(4): Ladder(s) were used for purposes other than the purpose for which they were designed: (a) FRONT YARD - Employees entered and exited the ten foot deep trench by using a Werner eight foot step ladder by using the ladder to climb to the bench that had been cut into the trench and then manually climbing the remaining four foot vertical wall, thereby exposing the employee(s) to possible injury, on or about August 24, 2017. Abatement certification required within 10 days after abatement date. The certification shall include a statement that abatement is complete, date and method of abatement, and states employees and their representatives were informed of this abatement.
Recent events (2)
- · I (S) $0
- · Z (S) $0
More inspections in this industry (NAICS 238910)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342578101.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.