DALLAS, TX ·
OSHA Inspection: DALLAS METAL FABRICATORS, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of DALLAS METAL FABRICATORS, INC. in 2817 LOGAN STREET, DALLAS, TX 75215 (NAICS 332999). OSHA activity number 342594322.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DALLAS METAL FABRICATORS, INC.
- Site address
- 2817 LOGAN STREET
- City
- DALLAS
- State
- TX
- ZIP
- 75215
- Mailing
- 2817 LOGAN STREET, DALLAS, TX 75215
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 17
- Ownership type
- Private (A)
Citations
6 citations on file for this inspection.
1910.133 A01
- Issued
- Nov 2, 2017
- Abate by
- Nov 30, 2017
- Penalty
- Initial $5,070 · Current $3,550 Reduced
General-duty citation text
29 CFR 1910.133(a)(1): Protective eye equipment was not required where there was a reasonable probability of injury that could be prevented by such equipment: a) This violation occurred on August 29, 2015, at a job site located at 2817 Logan Street, Dallas, Texas 75215; where at least one (1) employee using a cold saw (model #32-539-6, no legible serial number), exposed to eye injuries.
Recent events (2)
- · I (S) $3550
- · Z (S) $5070
1910.178 L01 I
- Issued
- Nov 2, 2017
- Abate by
- Nov 30, 2017
- Penalty
- Initial $2,897 · Current $2,025 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l): a) This violation was discovered on August 29, 2017, at a job site located at 2817 Logan Street, Dallas, Texas 75215; where at least three (3) employees operated one of the three forklifts at the facility.
Recent events (2)
- · I (S) $2025
- · Z (S) $2897
1910.212 A01
- Issued
- Nov 2, 2017
- Abate by
- Nov 30, 2017
- Penalty
- Initial $4,346 · Current $3,050 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Employees operating drills presses were not protected from any part of their body coming in contact with point of operation, ingoing nip points, rotating parts, flying chips and sparks.
Recent events (2)
- · I (S) $3050
- · Z (S) $4346
1910.212 B
- Issued
- Nov 2, 2017
- Abate by
- Nov 30, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(b)(1): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: a) Employees operating Blackhawke drill press (model #DP-589, serial #67539), Bridgeport drill press (no model #, serial #J-50764) and Royal drill press (no legible model/serial numbers) drill presses were not protected from equipment walking or moving, exposed to struck-by hazards.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.219 C03
- Issued
- Nov 2, 2017
- Abate by
- Nov 30, 2017
- Penalty
- Initial $4,346 · Current $0 Reduced
General-duty citation text
29 CFR 1910.219(c)(3): Vertical or inclined shafting seven -7 feet or less from floor or working platform was not enclosed with stationary casing(s): a) Employer did not ensure vertical shafts were enclosed with stationary casing(s) to protect employees operating the Enco lathe (model #110-2034, s/n 0316) from exposure to caught-in hazards.
Recent events (2)
- · I (S) $0
- · Z (S) $4346
1910.219 F01 I
- Issued
- Nov 2, 2017
- Abate by
- Nov 30, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(f)(1)(i): Gear(s) were not guarded by a complete enclosure or by one of the methods specified in 29 CFR 1910.219(f)(1)(ii) and (f)(1)(iii): Employer did not ensure gear(s) were completely enclosed to protect employees operating the Enco lathe (model #110-2034, s/n 0316) from exposure to caught-in hazards.
Recent events (2)
- · I (S) $0
- · Z (S) $0
More inspections in this industry (NAICS 332999)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 342594322.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.