Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: STRATHAM TIRE

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of STRATHAM TIRE in 9 INDUSTRIAL TARGET CIRCLE, BANGOR, ME 04401 (NAICS 441320). OSHA activity number 342598489.

Watch Stratham Tire — free Get an email when a new federal OSHA severe-injury report for Stratham Tire is published. One employer, no account, unsubscribe in one click.
Establishment
STRATHAM TIRE
Site address
9 INDUSTRIAL TARGET CIRCLE
City
BANGOR
State
ME
ZIP
04401
Mailing
355 RT 125, BRENTWOOD, NH 03833
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
441320
Employees
18
Ownership type
A

6 citations on file for this inspection.

5(a)(1)

Serious Gravity 5 2 instances 6 exposed
Issued
Abate by
Penalty
Initial $8149.00 · Current $4075.00 Reduced
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that the employees were exposed to vehicles falling from or shifting on automotive lifts:    In the following instances employees were exposed to the hazards of falling and shifting vehicles:    a) Auto Shop - Automotive lifts were not safely operated and vehicles were not properly supported, balanced or mounted.    b) Auto Shop - There is no record of any of the lifts being subject to annual inspections.
Recent events (2)
  • — I (S) $4075
  • — Z (S) $8149

1910.133 A01

Serious Gravity 5 2 instances 4 exposed
Issued
Abate by
Penalty
Initial $6519.00 · Current $3260.00 Reduced
29 CFR 1910.133(a)(1): The employer did not ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation:    Auto Shop - The employer did not ensure that each employee who worked in the auto shop used safety glasses when using pneumatic tools and/or working under vehicles.
Recent events (2)
  • — I (S) $3260
  • — Z (S) $6519

1910.157 E02

Deleted Other-than-serious 6 instances 6 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.157(e)(2): Portable fire extinguishers were not visually inspected at least monthly:   Facility Wide -  The portable fire extinguishers distributed throughout the facility had not been subjected to a monthly inspection.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 E01

Deleted Other-than-serious 1 instance 18 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met:  Facility Wide - The written hazard communication program had not been updated to reflect the requirements of the global harmonization training and labeling.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.215 A04

Serious Gravity 5 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $8149.00 · Current $0.00 Reduced
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch:    Auto Shop - The work rest on the Porter-Cable bench grinder was not adjusted to within one eighth of an inch from the grinding wheel.
Recent events (2)
  • — I (S) $0
  • — Z (S) $8149

1910.215 D01

Serious Gravity 5 1 instance 5 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.215(d)(1): Wheel(s) on grinding machine(s) were not sounded (ring test) and inspected for damage before mounting:    Auto Shop - The grinding wheel was not ring tested before being installed on the  Porter-Cable bench grinder.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342598489.