Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: G & M PEDRO'S CONSTRUCTION, LLC

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of G & M PEDRO'S CONSTRUCTION, LLC in 2630 OLD WINDER HIGHWAY DUNKIN DONUTS, BRASELTON, GA 30517 (NAICS 238130). OSHA activity number 342610193.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch G & M Pedro'S Construction, LLC — free Get an email when a new federal OSHA severe-injury report for G & M Pedro'S Construction, LLC is published. One employer, no account, unsubscribe in one click.
Site address
2630 OLD WINDER HIGHWAY DUNKIN DONUTS
City
BRASELTON
State
GA
ZIP
30517
Mailing
120 HIDEAWAY VILLAGE LOT#104, WOODSTOCK, GA 30188
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
8
Ownership type
A

5 citations on file for this inspection.

1926.501 B01

Serious Gravity 10 1 instance 3 exposed
Issued
Feb 14, 2018
Penalty
Initial $3,880 · Current $1,699 Reduced
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems:  On or about 9/1/2017 at 2630 Old Winder Highway Braselton, GA. roofers were observed installing roof sheathing  plywood on the new construction Dunkin Donuts without any personal fall protection. Workers were exposed to 18-foot fall hazards to the lower level.
Recent events (2)
  • — I (S) $1699.44
  • — Z (S) $3880

1926.602 C01 II

Serious Gravity 5 1 instance 1 exposed
Issued
Feb 14, 2018
Penalty
Initial $2,217 · Current $1,699 Reduced
29 CFR 1926.602(c)(1)(ii): Modifications or additions affecting the safe operation of the equipment were  made without the manufacturer's written approval:  On or about 9/1/2017 at 2360 Old winder Highway Braselton, GA, an employee was observed performing plywood siding installation from a wooden box being lifted by the forks  of the RT JLG forklift exposing him to fall hazards of 8-feet to the lower level.
Recent events (2)
  • — I (S) $1699.44
  • — Z (S) $2217

1926.602 D

Serious Gravity 10 1 instance 1 exposed
Issued
Feb 14, 2018
Abate by
Mar 12, 2018
Penalty
Initial $3,880 · Current $1,699 Reduced
29 CFR 1926.602(d): The employer did not certify that each operator had been trained and evaluated as required by paragraph 29 CFR 1910.178(l):  On or about 9/1/2017 at 2360 Old winder Highway Braselton, GA, the employer failed to train or certify the operator of the JLG powered industrial truck that was observed in use with a worker performing plywood siding installation from a wooden box on the forks of the JLG lift exposing him to fall hazards of 8-feet to the lower level.
Recent events (2)
  • — I (S) $1699.44
  • — Z (S) $3880

1926.1053 B04

Serious Gravity 1 1 instance 1 exposed
Issued
Feb 14, 2018
Abate by
Mar 12, 2018
Penalty
Initial $1,413 · Current $1,699
29 CFR 1926.1053(b)(4): Ladder(s) were used for purposes other than the purpose for which they were designed:  On or about 9/1/2017 at 2630 Old Winder Highway Braselton, GA; a worker was observed exposed to a 5-foot fall hazard while taking a measurement from a closed 6-foot Werner step ladder that was used in a closed set-up, leaning against the wall.
Recent events (2)
  • — I (S) $1699.44
  • — Z (S) $1413

1926.1053 B16

Serious Gravity 5 1 instance 4 exposed
Issued
Feb 14, 2018
Abate by
Mar 12, 2018
Penalty
Initial $2,772 · Current $1,699 Reduced
29 CFR 1926.1053(b)(16): Portable ladders with structural defects, such as, but not limited to, broken or missing rungs, cleats, or steps, broken or split rails, corroded components, or other faulty or defective components, were not either immediately marked in a manner that readily identifies them as defective, or tagged with "Do Not Use" or similar language, and were not withdrawn from service until repaired:  On or about 9/1/2017 at 2630 Old Winder Highway Braselton, GA; workers accessing and egressing the roof were exposed to 18-foot fall hazards where the visibly damaged Werner metal extension ladder was not removed from service. The left vertical support was bent at the 4th rung from the top. Support damage could cause potential stability issues that could promote tip over. The 3rd rung from the top was dented which could cause slip hazards. Additionally, both feet were missing which could promote potential tipping and fall hazards in soft earth.
Recent events (2)
  • — I (S) $1699.44
  • — Z (S) $2772

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342610193.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.