Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: NJ MARBLE AND GRANITE, LLC

Referral inspection · Health discipline

On , OSHA opened a referral health inspection of NJ MARBLE AND GRANITE, LLC in 1435 51ST STREET, NORTH BERGEN, NJ 07047 (NAICS 327991). OSHA activity number 342617412.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch NJ Marble and Granite, LLC — free Get an email when a new federal OSHA severe-injury report for NJ Marble and Granite, LLC is published. One employer, no account, unsubscribe in one click.
Site address
1435 51ST STREET
City
NORTH BERGEN
State
NJ
ZIP
07047
Mailing
1435 51ST STREET, NORTH BERGEN, NJ 07047
Inspection type
Referral (C)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
327991
Employees
13
Ownership type
A

9 citations on file for this inspection.

1910.95 C01

Serious Gravity 5 2 instances 2 exposed
Issued
Feb 7, 2018
Abate by
Apr 18, 2018
Penalty
Initial $3,696 · Current $2,375 Reduced

Hazardous substances 81108111

29 CFR 1910.95(c)(1): The employer did not administer a continuing, effective hearing conservation program as described in 29 CFR 1910.9(c) through (o) whenever employee noise exposures equal or exceed an 8-hour time-weighted average sound level of 85 decibels measured on the A scale, or equivalently a dose of fifty percent:    a) Workplace, 1435 51st Street, North Bergen, NJ 07047    a) An employee fabricating granite and quartz countertops was exposed to continuous noise levels at 171.6 %  of the permissible  daily noise exposure (8 hour Time Weighted Average sound level of 90 dBA) which is 1.71 times the allowable exposure limit.  The action level (AL) is 85 dBA.  The equivalent sound level of the measured dose is 93.9 dBA.  Sampling was performed for 343 minutes on 09/05/2017, with the unsampled portion of time considered to represent zero for the exposure calculation.    b) An employee fabricating granite and quartz countertops was exposed to continuous noise at 85.2% of the permissible daily noise exposure (8 hour Time Weighted Average sound level of 90 dBA) which is 0.85 times the allowable exposure limit.  The action level (AL) is 85 dBA.  The equivalent sound level of the measured dose is 88.8 dBA.  Sampling was performed for 343 minutes on 09/05/2017, with the unsampled portion of time considered to represent zero for the exposure calculation.      Violation occurred on or about 09/05/2017
Recent events (2)
  • — I (S) $2375
  • — Z (S) $3696

1910.132 D02

Serious Gravity 5 1 instance 2 exposed
Issued
Feb 7, 2018
Penalty
Initial $3,696 · Current $2,375 Reduced
29 CFR 1910.132(d)(2): The employer did not verify, through a written certification, that the required workplace hazard assessment had been performed:    Workplace, 1435 51st Street, North Bergen, NJ 07047    a) Employees throughout the facility used protective equipment including goggles, gloves, hardhats, filtering facepiece and elastomeric half mask negative pressure respirators .  However, the employer failed to verify that the workplace hazard assessment had been conducted.  In addition, the employer failed to provide hearing protection for workers fabricating granite and quartz countertops exposed to continuous noise above the OSHA permissible exposure limit and action level.     Violation occurred on or about 09/05/2017
Recent events (2)
  • — I (S) $2375
  • — Z (S) $3696

1910.134 C01

Serious Gravity 5 1 instance 2 exposed
Issued
Feb 7, 2018
Abate by
Apr 18, 2018
Penalty
Initial $3,696 · Current $2,375 Reduced
29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use:    Workplace, 1435 51st Street, North Bergen, NJ 07047    a) The employer did not establish and implement a written respiratory protection program for employees required to use filtering facepiece and elastomeric negative pressure respirators when cutting, buffing and grinding materials including but not limited to countertops pieces that contain Quartz Silica.     Violation occurred on or about 09/05/2017
Recent events (2)
  • — I (S) $2375
  • — Z (S) $3696

1910.134 E01

Serious Gravity 5 1 instance 2 exposed
Issued
Feb 7, 2018
Abate by
Apr 18, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace:      Workplace, 1435 51st Street, North Bergen, NJ 07047    a) The employer did not provide medical evaluations  for employees required to use half mask elastomeric negative pressure respirators or filtering facepiece respirators when cutting, buffing and grinding materials including but not limited to countertops pieces that contain Quartz Silica.     Violation occurred on or about 09/05/2017
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 F01

Serious Gravity 5 1 instance 2 exposed
Issued
Feb 7, 2018
Abate by
Apr 18, 2018
Penalty
Initial $0 · Current $0

Hazardous substances 9010

29 CFR 1910.134(f)(1): The employer did not ensure that employee(s) required to use a tight-fitting facepiece respirator passed the appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT):    Workplace, 1435 51st Street, North Bergen, NJ 07047    a) The employer did not provide fit tests for employees required to use filtering facepiece and half mask elastomeric negative pressure respirators when cutting, buffing and grinding materials including but not limited to countertops pieces that contain Quartz Silica.        Violation occurred on or about 09/05/2017
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.134 K03

Serious Gravity 5 1 instance 6 exposed
Issued
Feb 7, 2018
Abate by
Apr 18, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.134(k)(3): Training was not provided prior to requiring employees to use a respirator in the workplace:    Workplace, 1435 51st Street, North Bergen, NJ 07047    a) The employer failed to provide employees with respirator training to include but not limited to the use, fit check, maintenance and inspection of  filtering facepiece and half mask negative pressure elastomeric respirators while cutting, buffing and grinding materials including countertop pieces that contain Quartz Silica.     Violation occurred on or about 09/05/2017
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 E01

Serious Gravity 5 1 instance 2 exposed
Issued
Feb 7, 2018
Abate by
Apr 18, 2018
Penalty
Initial $3,696 · Current $2,375 Reduced
29 CFR 1910.1200(e)(1): Employer had not developed or implemented a written hazard communication program included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii):     Workplace, 1435 51st Street, North Bergen, NJ    a) The employer did not develop and implement a written hazard communication program for employees required to cut, grind and buff granite and quartz countertop products that contain Silica Quartz .    Violation occurred on or about 09/05/2017
Recent events (2)
  • — I (S) $2375
  • — Z (S) $3696

1910.1200 G01

Serious Gravity 5 1 instance 2 exposed
Issued
Feb 7, 2018
Abate by
Apr 18, 2018
Penalty
Initial $0 · Current $0

Hazardous substances 9010

29 CFR 1910.1200(g)(1): Employers did not have a safety data sheet in the workplace for each hazardous chemical which they use:    Workplace, 1435 51st Street, North Bergen, NJ 07047    a) The employer did not maintain safety data sheets for granite and quartz countertops that release dust containing silica quartz during cutting, grinding and buffing operations.      Violation occurred on or about 09/05/2017
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.1200 H03 II

Serious Gravity 5 1 instance 2 exposed
Issued
Feb 7, 2018
Abate by
Apr 18, 2018
Penalty
Initial $0 · Current $0

Hazardous substances 9010

29 CFR 1910.1200(h)(3)(ii): Employee training did not include the physical and health hazards of the chemicals in the work area:    Workplace, 1435 51st Street, North Bergen, NJ 07047    a) The employer did not train workers in the physical and health hazards of silica quartz liberated during granite and quartz countertop cutting, grinding and buffing operations.      Violation occurred on or about 09/05/2017
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View NJ Marble and Granite, LLC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342617412.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.