OSHA Inspection: MARIO PINZON ALVARRAN

Issued

2018-07-19 00:00:00

Abate by

2018-08-14 00:00:00

Penalty

Initial $311.00 · Current $311.00

General-duty citation text

29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:  a) On or about July 18, 2018, the employer failed to submit certification of corrective action for citation 1, item 2,  issued on 02/13/2018, with an abatement due date of 03/12/2018.   b) On or about July 18, 2018, the employer failed to submit certification of corrective action for citation 1, item 3,  issued on 02/13/2018, with an abatement due date of 03/12/2018.

Issued

2018-07-19 00:00:00

Abate by

2018-08-14 00:00:00

Penalty

Initial $311.00 · Current $311.00

General-duty citation text

29 CFR 1903.19(d)(1): The employer did not submit to the Agency documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required.  a) On or about July 18, 2018, the employer failed to submit documentation and certification of corrective action for citation 1, item 2,  issued on 02/13/2018, with an abatement due date of 03/12/2018.   b) On or about July 18, 2018, the employer failed to submit documentation and certification of corrective action for citation 1, item 3,  issued on 02/13/2018, with an abatement due date of 03/12/2018.

Issued

2018-02-13 00:00:00

Penalty

Initial $2217.00 · Current $2217.00

General-duty citation text

29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets:  On or about September 5, 2017, at 2950 Weslington Circle, Cumming, Georgia:  An employee performing framing work was exposed to struck-by hazards from falling nail guns, and plywood from the employees working above him when he worked at ground level without wearing head protection.

Issued

2018-02-13 00:00:00

Abate by

2018-03-12 00:00:00

Penalty

Initial $2772.00 · Current $2772.00

General-duty citation text

29 CFR 1926.300(b)(1): Power operated tool(s), designed to accommodate guards, were not equipped with such guards when in use:  On or about September 5, 2017, at 2950 Weslington Circle, Cumming, Georgia:  An employee performing framing work was exposed to amputation hazards when he operated a Makita 5007F circular saw with a piece of wood wedged to prevent the bottom blade guard from actuating.

Issued

2018-02-13 00:00:00

Abate by

2018-03-12 00:00:00

Penalty

Initial $3880.00 · Current $3880.00

General-duty citation text

29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b):   On or about September 5, 2017, at 2950 Weslington Circle, Cumming, Georgia:  Two employees performing framing work were exposed to fall hazards of approximately 24-feet and greater when they worked from the trusses of a house without using fall protection.

Issued

2018-02-13 00:00:00

Penalty

Initial $3880.00 · Current $3880.00

General-duty citation text

29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed:  On or about September 5, 2017, at 2950 Weslington Circle, Cumming, Georgia:  Two employees performing framing work were exposed to a fall hazard of approximately 9.8-feet when they used an aluminum ladder that was not extended at least three feet above the roof landing.