BUFFALO, NY —
OSHA Inspection: SABRE TILE CORPORATION
Unprogrammed Related inspection · Health discipline
At a glance
On , OSHA opened an unprogrammed Related health inspection of SABRE TILE CORPORATION in 1595 HOPKINS ROAD, BUFFALO, NY 14221 (NAICS 238330). OSHA activity number 342678752.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SABRE TILE CORPORATION
- Site address
- 1595 HOPKINS ROAD
- City
- BUFFALO
- State
- NY
- ZIP
- 14221
- Mailing
- 230 COLORADO AVENUE, BUFFALO, NY 14215
What kind of inspection was it?
- Inspection type
- Unprogrammed Related (G)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238330
- Employees
- 8
- Ownership type
- A
Citations
5 citations on file for this inspection.
1903.19 C01
- Issued
- Jan 14, 2019
- Abate by
- Feb 14, 2019
- Penalty
- Initial $726 · Current $726
General-duty citation text
29 CFR 1903.19(c)(1): The employer failed to certify to OSHA (the Agency) that the following item(s) were abated within 10 calendar days after the abatement date: a) On or about January 14, 2019, abatement certification for Citation 1, Items 1a, 1b, 2 and 3 of Inspection 1267875 due not later than 8/9/2018 per Item #3 of the stipulated settlement agreement which became a final order on 7/9/2018. ABATEMENT CERTIFICATION REQUIRED
Recent events (1)
- — Z (O) $726
1926.1153 C01
- Issued
- Feb 9, 2018
- Abate by
- Mar 14, 2018
- Penalty
- Initial $6,467 · Current $3,250 Reduced
9000
General-duty citation text
29 CFR 1926.1153(c)(1): The employer did not implement the engineering controls, work practices, and respiratory protection specified for the task on Table 1, for each employee engaged in a task identified on Table 1, and the employer did not assess and limit the exposure of employees to respirable crystalline silica in accordance with paragraph (d) of this section. a) On or about 10/2/17, Williamsville North High School - a bricklayer was using a handheld chipping gun to chipping tile and its residual backing from the concrete block walls. The chipping was conducted dry without the use of a water delivery system that supplies a continuous stream or spray of water at the point of impact or a tool equipped with commercially available shroud and dust collection system as required by Table 1. ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
- — J (S) $3250
- — C (S) $6467
- — Z (S) $6467
1926.1153 D02 I
- Issued
- Feb 9, 2018
- Abate by
- Mar 14, 2018
- Penalty
- Initial $0 · Current $0
9000
General-duty citation text
29 CFR 1926.1153(d)(2)(i): The employer did not assess the exposure of each employee who was or may reasonably be expected to be exposed to respirable crystalline silica at or above the action level in accordance with either the performance option in paragraph (d)(2)(ii) or the scheduled monitoring option in paragraph (d)(2)(iii) of this section: a) Williamsville North High School - On or about 10/2/17, the employer did not assess the exposure level, to respirable crystalline silica, of a bricklayer who was chipping tile and its residual backing from the concrete block walls with a handheld chipping gun without the use of a water delivery system that supplies a continuous stream or spray of water at the point of impact or a tool equipped with commercially available shroud and dust collection system. ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
- — J (S) $0
- — C (S) $0
- — Z (S) $0
1926.1153 G01
- Issued
- Feb 9, 2018
- Abate by
- Mar 14, 2018
- Penalty
- Initial $6,467 · Current $3,250 Reduced
9000
General-duty citation text
29 CFR 1926.1153(g)(1): The employer did not establish and implement a written exposure control plan: a) Williamsville North High School - On or about 10/2/17, the employer did not develop and implement a written exposure control plan to control employee exposures to crystalline silica through the use of engineering controls as well as work practice controls. At the time of the inspection a bricklayer was observed using a handheld chipping gun to chip tile and its residual backing from the concrete block walls without the use of engineering controls, or personal protective equipment. ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
- — J (S) $3250
- — C (S) $6467
- — Z (S) $6467
1926.1153 I01
- Issued
- Feb 9, 2018
- Abate by
- Mar 14, 2018
- Penalty
- Initial $6,467 · Current $3,250 Reduced
9000
General-duty citation text
29 CFR 1926.1153(i)(1): The employer did not include respirable crystalline silica in the program established to comply with the hazard communication standard (HCS) (29 CFR 1910.1200): a) Williamsville North High School - On or about 10/2/17, employees are exposed to respirable crystalline silica while chipping tile and its residual backing from concrete brick walls. The employer did not include respirable crystalline silica in their hazard communication program. ABATEMENT CERTIFICATION REQUIRED
Recent events (3)
- — J (S) $3250
- — C (S) $6467
- — Z (S) $6467
More inspections at Sabre Tile Corporation
View Sabre Tile Corporation's full OSHA safety record →
More inspections in this industry (NAICS 238330)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342678752.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.