Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,198,547Inspections Most recent open 2026-09-01 Last loaded 2026-09-04

OSHA Inspection: STRADIX GROUP, LLC

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of STRADIX GROUP, LLC in 361 STEELHEAD WAY, BOISE, ID 83704 (NAICS 313310). OSHA activity number 342680238.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Stradix Group, LLC for free Get an email when a new federal OSHA severe-injury report for Stradix Group, LLC is published. One employer, no account, unsubscribe in one click.
Establishment
STRADIX GROUP, LLC
Site address
361 STEELHEAD WAY
City
BOISE
State
ID
ZIP
83704
Mailing
361 STEELHEAD WAY, BOISE, ID 83704
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
313310
Employees
15
Ownership type
Private (A)

5 citations on file for this inspection.

1910.134 C02 I

Serious Gravity 1 1 instance 2 exposed
Issued
Jan 2, 2018
Abate by
Jan 29, 2018
Penalty
Initial $2,173 · Current $1,521 Reduced
29 CFR 1910.134(c)(2)(i): The employer did not determine if the voluntary use of a respirator did not in itself create a hazard:  (a) Pad Printing Area: On or about October 4, 2017 and at times prior, employees wear GVS SPR451 Elipse P100 respirators while performing pad printing.  Note: Abatement certification is required for this item.
Recent events (2)
  • · I (S) $1521.1
  • · Z (S) $2173

1910.134 C02 II

Serious Gravity 1 1 instance 1 exposed
Issued
Jan 2, 2018
Abate by
Jan 29, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.134(c)(2)(ii): The employer did not establish and implement those elements of a written program necessary to ensure that any employee using a respirator voluntarily was medically able to use that respirator, and that the respirator was cleaned, stored, and maintained so that its use does not present a health hazard to the user:  (a) Pad Printing Area: On or about October 4, 2017 and at times prior, employees wear GVS SPR451 Elipse P100 respirators while performing pad printing.  Note: Abatement certification is required for this item.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1910.1200 E01

Serious Gravity 1 1 instance 2 exposed
Issued
Jan 2, 2018
Abate by
Jan 29, 2018
Penalty
Initial $2,173 · Current $1,521 Reduced
29 CFR 1910.1200(e)(1): Employer had not developed or implemented a written hazard communication program included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii):   (a) Pad Printing Area: On or about October 4, 2017 and at times prior, employees use Inkcups Now Corporation SBM Solvent, 1000H Hardener, and SB Series Ink.  All of these chemicals are flammable and may be harmful if inhaled.  1000H Hardener contains isocyanates which may produce an allergic reaction.  Note: Abatement certification is required for this item.
Recent events (2)
  • · I (S) $1521.1
  • · Z (S) $2173

1910.1200 F06

Serious Gravity 1 1 instance 2 exposed
Issued
Jan 2, 2018
Abate by
Jan 29, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(f)(6): Workplace labeling. Except as provided in paragraphs (f)(7) and (f)(8) of this section, the employer shall ensure that each container of hazardous chemicals in the workplace is labeled, tagged or marked:  (a) Pad Printing Area: On or about October 4, 2017 and at times prior, employees use Inkcups Now Corporation SBM Solvent.  SBM Solvent is flammable and may be harmful if inhaled.    Note: Abatement certification is required for this item.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1910.1200 H01

Serious Gravity 1 1 instance 2 exposed
Issued
Jan 2, 2018
Abate by
Jan 29, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:  (a) Pad Printing Area: On or about October 4, 2017 and at times prior, employees use Inkcups Now Corporation SBM Solvent, 1000H Hardener, and SB Series Ink.  All of these chemicals are flammable and may be harmful if inhaled.  1000H Hardener contains isocyanates which may produce an allergic reaction.  Note: Abatement certification is required for this item.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 342680238.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.