Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: NU WAY ROOFING INC

Federal Agency inspection · Safety discipline

On , OSHA opened a federal Agency safety inspection of NU WAY ROOFING INC in 903 BELLE AVE, HAMILTON, OH 45015 (NAICS 238160). OSHA activity number 342691391.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch NU WAY Roofing INC — free Get an email when a new federal OSHA severe-injury report for NU WAY Roofing INC is published. One employer, no account, unsubscribe in one click.
Establishment
NU WAY ROOFING INC
Site address
903 BELLE AVE
City
HAMILTON
State
OH
ZIP
45015
Mailing
210 W BROADWAY AVE, RICHMOND, KY 40475
Inspection type
Federal Agency (M)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
3
Ownership type
A

5 citations on file for this inspection.

1926.20 B02

Deleted Serious Gravity 10 2 instances 2 exposed
Issued
Mar 23, 2018
Abate by
Apr 18, 2018
Penalty
Initial $12,934 · Current $0 Reduced
29 CFR 1926.20(b)(2): Such programs shall provide for frequent and regular inspections of the job sites, materials, and equipment to be made by competent persons designated by the employers.  (A) On or about October 3, 2017, there were no frequent and regular inspections being performed by a competent person to ensure the jobsite, materials and equipment such as fall protection systems and/or devices were being maintained and utilized in a safe condition.   (B) On October 6, 2017, there were no frequent and regular inspections being performed by a competent person to ensure the jobsite, materials and equipment such as fall protection systems and/or devices were being maintained and utilized in a safe condition.
Recent events (2)
  • — I (S) $0
  • — Z (S) $12934

1926.21 B02

Deleted Serious Gravity 10 1 instance 1 exposed
Issued
Mar 23, 2018
Abate by
Apr 18, 2018
Penalty
Initial $12,934 · Current $0 Reduced
29 CFR 1926.21(b)(2): The employer shall instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his work environment to control or eliminate any hazards or other exposure to illness or injury.  On or about October 3, 2017, located on the south end of a commercial roof structure, an employee was performing roofing work (obtaining core samples) on a low-slope roof with unprotected sides or edges at a fall height greater than 35 feet above the ground below that had not been instructed on the applicable procedures and/or regulations to minimize those hazards while performing this work.
Recent events (2)
  • — I (S) $0
  • — Z (S) $12934

1926.501 B01

Serious Gravity 10 1 instance 1 exposed
Issued
Mar 23, 2018
Abate by
Apr 18, 2018
Penalty
Initial $12,934 · Current $6,000 Reduced
29 CFR 1926.501(b)(1): "Unprotected sides and edges." Each employee on a walking/working surface (horizontal and vertical surface) with an unprotected side or edge which is 6 feet (1.8 m) or more above a lower level shall be protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.    On Oct. 6, 2017, located on the south end of a commercial roof structure, an employee was working on a commercial structure with unprotected sides or edges while not utilizing a fall protection system when he fell through the roof. Fall heights were measured to be greater than 35 feet above the ground below.
Recent events (2)
  • — I (S) $6000
  • — Z (S) $12934

1926.501 B10

Serious Gravity 10 1 instance 1 exposed
Issued
Mar 23, 2018
Abate by
Apr 18, 2018
Penalty
Initial $12,934 · Current $0 Reduced
29 CFR 1926.501(b)(10): "Roofing work on Low-slope roofs." Except as otherwise provided in paragraph (b) of this section, each employee engaged in roofing activities on low-slope roofs, with unprotected sides and edges 6 feet (1.8 m) or more above lower levels shall be protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system. Or, on roofs 50-feet (15.25 m) or less in width (see Appendix A to subpart M of this part), the use of a safety monitoring system alone [i.e. without the warning line system] is permitted.    On or about Oct. 3, 2017, located on the south end of a commercial roof structure, an employee was performing roofing work while not utilizing a fall protection system. Potential fall heights were measured to be greater than 35 feet above the ground below.
Recent events (2)
  • — I (S) $0
  • — Z (S) $12934

1926.503 B01

Deleted Serious Gravity 1 1 instance 1 exposed
Issued
Mar 23, 2018
Abate by
Apr 18, 2018
Penalty
Initial $5,543 · Current $0 Reduced
29 CFR 1926.503(b)(1): The employer shall verify compliance with paragraph (a) of this section by preparing a written certification record. The written certification record shall contain the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer. If the employer relies on training conducted by another employer or completed prior to the effective date of this section, the certification record shall indicate the date the employer determined the prior training was adequate rather than the date of actual training.  The employer did not have written certification of fall protection training for an employee observed performing roofing work on a commercial roof structure while not utilizing a fall protection system and exposed to potential fall heights in excess of 35 feet.
Recent events (2)
  • — I (S) $0
  • — Z (S) $5543

View NU WAY Roofing INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342691391.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.