Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: SOUTHSIDE LUMBER COMPANY, INC.

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of SOUTHSIDE LUMBER COMPANY, INC. in 805 RICE ROAD, BUTLER, MO 64730 (NAICS 423310). OSHA activity number 342706785.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Southside Lumber Company, INC. — free Get an email when a new federal OSHA severe-injury report for Southside Lumber Company, INC. is published. One employer, no account, unsubscribe in one click.
Site address
805 RICE ROAD
City
BUTLER
State
MO
ZIP
64730
Mailing
805 RICE ROAD, BUTLER, MO 64730
Inspection type
Complaint (B)
Scope
Complete (A)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
423310
Employees
12
Ownership type
A

8 citations on file for this inspection.

1910.95 C01

Serious Gravity 10 1 instance 12 exposed
Issued
Feb 8, 2018
Abate by
Jun 7, 2018
Penalty
Initial $5,174 · Current $3,622 Reduced

Hazardous substances 81108111

29 CFR 1910.95(c)(1): The employer did not administer a continuing, effective hearing conservation program as described in 29 CFR 1910.9(c) through (o) whenever employee noise exposures equal or exceed an 8-hour time-weighted average sound level of 85 decibels measured on the A scale, or equivalently a dose of fifty percent:    Employees are exposed to occupational noise above the action level. The employer is failing to protect employees from occupational noise exposure by effective administration of a hearing conservation program. 8-hour time-weighted average sampling during the sampling period on December 20, 2017 showed decibel levels at or above a dose of 50 percent on the A scale or an equivalent sound level of 85 decibels.    a) An employee working at or near the edger saw was exposed to continuous noise levels at 260.1% of the allowable 8-hour time-weighted average sound level of 85 dBA or an equivalent sound level of approximately 96.8 dBA. The sampling was performed for 460 minutes during one shift, exposure calculations included a zero time for the 20 minutes not sampled.    b) An employee working at the tie grader was exposed to continuous noise levels at 273.3% of the allowable 8-hour time-weighted average sound level of 85 dBA or an equivalent sound level of approximately 96.5 dBA. The sampling was performed for 464 minutes during one shift, exposure calculations included a zero time for the 16 minutes not sampled.    c) An employee working at or near the stacking line was exposed to continuous noise levels at 151.1% of the allowable 8-hour time-weighted average sound level of 85 dBA or an equivalent sound level of approximately 92.9 dBA. The sampling was performed for 461 minutes during one shift, exposure calculations included a zero time for the 19 minutes not sampled.
Recent events (2)
  • — I (S) $3621.8
  • — Z (S) $5174

1910.265 C24 VIII C

Serious Gravity 5 1 instance 1 exposed
Issued
Feb 8, 2018
Abate by
Mar 7, 2018
Penalty
Initial $3,696 · Current $2,033 Reduced
29 CFR 1910.265(c)(24)(viii)(c): Wire rope clips attached with U-bolts did not have the bolts on the dead or short end of the rope:    Employees are exposed to struck-by and crushing hazards. One of the two wire rope clips attached with the U-bolts was installed backwards compromising the integrity of lifting equipment. This was discovered in the mill on the running line on the overhead gantry crane. The gantry crane is used to lift and transfer large logs to the mill to be cut.
Recent events (2)
  • — I (S) $2032.8
  • — Z (S) $3696

1910.265 C24 VIII E

Serious Gravity 5 1 instance 1 exposed
Issued
Feb 8, 2018
Abate by
Mar 7, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.265(c)(24)(viii)(e): Fittings. Hooks, shackles, rings, pad eyes, and other fittings that show excessive wear or that have been bent, twisted, or otherwise damaged shall be removed from service.  Employees were exposed to struck-by or crushing hazards. In the mill an overhead gantry crane is being used to transfer large tree stumps to be cut. Hooks on the hoist were damaged and missing their safety clasps.  a) The hook located at the end of the hoist rope was missing a safety clasp and could become dislodged from the hoist mount while carrying material.   b) The hook attached to the pulley wheel  for the log tongs was missing a safety clasp and could become dislodged from the hoist while carrying material.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.303 B01 II

Deleted Serious Gravity 5 1 instance 4 exposed
Issued
Feb 8, 2018
Abate by
Mar 7, 2018
Penalty
Initial $3,696 · Current $0 Reduced
29 CFR 1910.303(b)(1)(ii): Electrical equipment was not free from recognized hazards, based on the mechanical strength and durability, including, for parts designed to enclose and protect other equipment, the adequacy of the protection thus provided:  Employees are exposed to electrical shock hazards. In the mechanical room a large opening is present on the main saw breaker box. The opening is large enough to have a hand come into contact with live electrical parts.
Recent events (2)
  • — I (S) $0
  • — Z (S) $3696

1910.303 B02

Serious Gravity 5 1 instance 1 exposed
Issued
Feb 8, 2018
Abate by
Mar 7, 2018
Penalty
Initial $2,956 · Current $1,626 Reduced

Hazardous substances 8870

29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling:    Employee were exposed to electrical shock hazards. Listed or labeled relocatable power taps were not used or installed in accordance with instructions included in the listing or labeling which were in operation at 120 V. In the utilities area a relocatable power tap was connected in series (daisy chained) from a receptacle to power a portable lamp and lasers for the edger machine.
Recent events (2)
  • — I (S) $1625.8
  • — Z (S) $2956

1910.305 G01 IV A

Serious Gravity 5 1 instance 1 exposed
Issued
Feb 8, 2018
Abate by
Mar 7, 2018
Penalty
Initial $2,956 · Current $1,626 Reduced

Hazardous substances 8870

29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure:    Employees were exposed to electrical shock hazards. In the facility flexible cord and cables were used as a substitute for permanent wiring. This was demonstrated in the mill  between the mechanical room and the chipper room. An extension cord was run from an outlet receptacle through the ceiling rafters to power machinery in the chipper room.
Recent events (2)
  • — I (S) $1625.8
  • — Z (S) $2956

1910.179 B05

Other-than-serious 1 instance 4 exposed
Issued
Feb 8, 2018
Abate by
Jun 7, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.179(b)(5): The rated load of crane(s) was not plainly marked on each side of the crane:    Employees are exposed to struck-by or crushing hazards. In the mill a gantry crane is being used to lift timber logs with a hoist and log tongs. The beam that the hoist is attached to does not contain the rated capacity for the maximum load it can safely handle.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1200 F06 II

Other-than-serious 1 instance 2 exposed
Issued
Feb 8, 2018
Abate by
Jun 7, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(f)(6)(ii): Except as provided in 29 CFR 1910.1200(f)(7) and 29 CFR 1910.1200(f)(8), the employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the product identifier and words, pictures, symbols, or combination thereof, which provide at least general information regarding the hazards of the chemicals and which, in conjunction with the other information immediately available to employees under the hazard communication program, would provide employees with the specific information regarding the physical and health hazards of the hazardous chemical    Employees were exposed to a chemical  known as "used oil" in the workplace. Secondary containers were being used to dispense the hydraulic oil as a lubricant. The containers either did not contain a label at to their contents or they contained a label that did not match their contents.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Southside Lumber Company, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342706785.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.