SIOUX FALLS, SD —
OSHA Inspection: G3 FIRE, LLC
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of G3 FIRE, LLC in 25814 RUDOLPH AVENUE, SIOUX FALLS, SD 57107 (NAICS 339999). OSHA activity number 342716495.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- G3 FIRE, LLC
- Site address
- 25814 RUDOLPH AVENUE
- City
- SIOUX FALLS
- State
- SD
- ZIP
- 57107
- Mailing
- 25814 RUDOLPH AVENUE, SIOUX FALLS, SD 57107
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 339999
- Employees
- 66
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.28 B01 I
- Issued
- Jan 19, 2018
- Abate by
- Mar 14, 2018
- Penalty
- Initial $3,298 · Current $2,000 Reduced
General-duty citation text
29 CFR 1910.28(b)(1)(i): The employer did not ensure that each employee on a walking-working surface with an unprotected side or edge that is 4 feet (1.2 m) or more above a lower level was protected from falling hazards: (a) G3 Fire, LLC at 25814 Rudolph Avenue, Sioux Falls, SD 57107: On and prior to November 7, 2017, the employer did not ensure employees required to access the top of a water tank to enter and install bracing were protected from fall hazards greater than 4 feet. This condition exposed employees to fall hazards of approximately 4.5 feet.
Recent events (2)
- — I (S) $2000
- — Z (S) $3298
1910.178 L01 I
- Issued
- Jan 19, 2018
- Abate by
- Feb 14, 2018
- Penalty
- Initial $3,298 · Current $2,000 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): (a) G3 Fire, LLC at 25814 Rudolph Avenue, Sioux Falls, SD 57107: On and prior to November 7, 2017, the employer did not ensure employees had completed a training and evaluation program prior to operating the Komatsu 25 LP forklift. This condition exposed employees to struck-by and caught between hazards.
Recent events (2)
- — I (O) $2000
- — Z (S) $3298
1910.178 L06
- Issued
- Jan 19, 2018
- Abate by
- Feb 14, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(6): Certification. The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l): (a) G3 Fire, LLC at 25814 Rudolph Avenue, Sioux Falls, SD 57107: On and prior to November 7, 2017, The employer did not certify that each forklift operator had been trained and evaluated. This condition exposed employees to struck-by and caught between hazards.
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.212 A03 II
- Issued
- Jan 19, 2018
- Abate by
- Mar 14, 2018
- Penalty
- Initial $3,298 · Current $2,000 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): The employer did not ensure the point of operation of machines whose operation exposes an employee to injury was guarded: (a) G3 Fire, LLC at 25814 Rudolph Avenue, Sioux Falls, SD 57107: On and prior to November 7, 2017, the employer did not ensure the bit used on the router table was appropriately guarded. This condition exposed employees to caught-by hazards.
Recent events (2)
- — I (S) $2000
- — Z (S) $3298
1910.334 A03 I
- Issued
- Jan 19, 2018
- Abate by
- Feb 14, 2018
- Penalty
- Initial $2,803 · Current $1,600 Reduced
General-duty citation text
29 CFR 1910.334(a)(3)(i): The employer did not ensure flexible cords used with grounding type equipment contained an equipment grounding conductor: (a) G3 Fire, LLC at 25814 Rudolph Avenue, Sioux Falls, SD 57107: On and prior to October 20, 2017, The employer did not ensure a flexible cord with an equipment grounding conductor was used for the router table. This exposed employees using the table to electrical hazards.
Recent events (2)
- — I (O) $1600
- — Z (S) $2803
More inspections in this industry (NAICS 339999)
More inspections in SD
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342716495.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.