Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: SLSB, LLC DBA ST. LOUIS SCREW & BOLT

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of SLSB, LLC DBA ST. LOUIS SCREW & BOLT in 2000 ACCESS BLVD, MADISON, IL 62060 (NAICS 332722). OSHA activity number 342730314.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Slsb, LLC DBA ST. Louis Screw & Bolt — free Get an email when a new federal OSHA severe-injury report for Slsb, LLC DBA ST. Louis Screw & Bolt is published. One employer, no account, unsubscribe in one click.
Site address
2000 ACCESS BLVD
City
MADISON
State
IL
ZIP
62060
Mailing
2000 ACCESS BLVD., P.O. BOX 260, MADISON, IL 62060
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332722
Employees
123
Ownership type
A

5 citations on file for this inspection.

1910.132 C

Serious Gravity 5 1 instance 3 exposed
Issued
Nov 15, 2017
Abate by
Jan 4, 2018
Penalty
Initial $6,519 · Current $4,238 Reduced
29 CFR 1910.132(c):   All personal protective equipment was not of safe design and construction for the work to be performed.        The employer provided protective gloves which were not of safe design and construction for the work performed on the Nutmate Machines.
Recent events (2)
  • — I (S) $4238
  • — Z (S) $6519

1910.132 D02

Other-than-serious 1 instance 125 exposed
Issued
Nov 15, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.132(d)(2): The employer did not verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated, the person certifying that the evaluation has been performed, the date(s) of the hazard assessment, and, which identifies the document as a certification of hazard assessment:    The employer did not verify that the required workplace hazard assessment had been performed through a written certification.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

1910.212 A03 III

Deleted Serious Gravity 5 1 instance 3 exposed
Issued
Nov 15, 2017
Abate by
Jan 4, 2018
Penalty
Initial $6,519 · Current $0 Reduced
29 CFR 1910.212(a)(3)(iii): Special hand tools for placing and removing material(s) was not provided to permit easy handling of material without the operator placing a hand in the danger zone:  The employer did not provide hand tools for placing and removing bolts by hand from the danger zone of the Nutmate machine.
Recent events (2)
  • — I (S) $0
  • — Z (S) $6519

1910.305 G02 III

Serious Gravity 5 1 instance 2 exposed
Issued
Nov 15, 2017
Penalty
Initial $6,519 · Current $4,238 Reduced
29 CFR 1910.305(g)(2)(iii): Flexible cords were not connected to devices and fittings so that tension would not be transmitted to joints or terminal screws:    Employees were exposed to electrical shock where flexible cords entered a Nutmate machine and were not provided with a bushing designed to prevent the transmission of tension to the terminal screws.
Recent events (2)
  • — I (S) $4238
  • — Z (S) $6519

1904.4 A

Other-than-serious 1 instance 1 exposed
Issued
Nov 15, 2017
Penalty
Initial $1,630 · Current $1,059 Reduced
29 CFR 1904.4(a): The employer did not record each work-related fatality, injury or illness case that resulted in the general recording criteria on the OSHA Form 300 or equivalent:    SLSB dba St. Louis Screw and Bolt, Madison, Illinois: On or about October 26, 2017 the employer did not record the following work injury on the OSHA 300 log for the calendar year 2017.    On or about May 16, 2017, a recordable injury occurred when an employee received stitches due to a left hand finger laceration from a Nutmate machine.
Recent events (2)
  • — I (O) $1059
  • — Z (O) $1630

View Slsb, LLC DBA ST. Louis Screw & Bolt's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342730314.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.