STOCKTON, AL —
OSHA Inspection: OVERSEAS HARDWOODS COMPANY, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of OVERSEAS HARDWOODS COMPANY, INC. in 52333 HWY 225, STOCKTON, AL 36579 (NAICS 321918). OSHA activity number 342733326.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- OVERSEAS HARDWOODS COMPANY, INC.
- Site address
- 52333 HWY 225
- City
- STOCKTON
- State
- AL
- ZIP
- 36579
- Mailing
- 24 TACON STREET, MOBILE, AL 36607
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321918
- Employees
- 43
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.147 C04 II B
- Issued
- Feb 8, 2018
- Penalty
- Initial $3,958 · Current $3,807 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(ii)(B): The energy control procedure did not clearly and specifically specific procedural steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy: a) Finger Jointer #2; On or about October 25, 2017 and at times prior thereto, employees engaged in servicing and maintenance activities on Finger Jointer #2 were exposed to the pneumatic energy present on the machine in that the energy control procedure did not identify specific procedural steps for controlling this hazardous energy. b) Woods 412 Matcher; On or about October 25, 2017 and at times prior thereto, employees engaged in servicing and maintenance activities on Woods 412 Matcher were exposed to the pneumatic energy present on the machine in that the energy control procedure did not identify specific procedural steps for controlling this hazardous energy. c) Chopsaw #2; On or about October 25, 2017 and at times prior thereto, employees engaged in servicing and maintenance activities on Chopsaw #2 potentially exposed to the pneumatic energy present on the machine in that the energy control procedure did not identify specific procedural steps for controlling this hazardous energy.
Recent events (2)
- — I (S) $3807
- — Z (S) $3958
1910.147 C06 II
- Issued
- Feb 8, 2018
- Abate by
- Feb 28, 2018
- Penalty
- Initial $4,656 · Current $3,807 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(ii): The employer did not certify that periodic inspections of the energy control procedures had been performed: a) Equipment in the facility; On or about October 25, 2017 and at times prior thereto, the employer failed to certify that periodic inspections with authorized employees who perform servicing and maintenance on equipment including but not limited to, Air Dryer #1, Chopsaw #2, and Finger Jointer #2, had been performed to ensure these employees were performing the written energy control procedures correctly.
Recent events (2)
- — I (S) $3807
- — Z (S) $4656
1910.147 C06 I
- Issued
- Feb 8, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) Finger Jointer #2; On or about October 25, 2017 and at times prior thereto, the employer exposed employees to the hazardous energy present on Finger Jointer #2 in that the employer failed to perform a periodic review of the energy control procedures at least annually to ensure the procedures were correct. b) Chopsaw #2; On or about October 25, 2017 and at times prior thereto, the employer exposed employees to the hazardous energy present on Chopsaw #2 in that the employer failed to perform a periodic review of the energy control procedures at least annually to ensure the procedures were correct. c) Air Dryer #1; On or about October 25, 2017 and at times prior thereto, the employer exposed employees to the hazardous energy present on Air Dryer #1 in that the employer failed to perform a periodic review of the energy control procedures at least annually to ensure the procedures were correct.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Overseas Hardwoods Company, INC.
View Overseas Hardwoods Company, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321918)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342733326.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.