WHITE PLAINS, NY —
OSHA Inspection: OAKLEY METAL STAMPING INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of OAKLEY METAL STAMPING INC. in 127 OAKLEY AVE., WHITE PLAINS, NY 10601 (NAICS 332119). OSHA activity number 342736063.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- OAKLEY METAL STAMPING INC.
- Site address
- 127 OAKLEY AVE.
- City
- WHITE PLAINS
- State
- NY
- ZIP
- 10601
- Mailing
- 127 OAKLEY AVE., WHITE PLAINS, NY 10601
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332119
- Employees
- 45
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.212 A01
- Issued
- Feb 5, 2018
- Penalty
- Initial $6,467 · Current $3,978 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: On or about 10/26/2017 Location: Tool and Die Maker room (a) Milling Machine, South East Wall, the rotating mill bit on the Bridgeport vertical mill machine, asset# 211, was not provided with shield guard to prevent employee exposure to flying chips and point of operation hazard. (b) South East Wall, Lathe Machine, asset# 214, was not equipped with an enclosure guard for the rotating chuck and to contain flying chips.
Recent events (2)
- — I (S) $3978
- — Z (S) $6467
1910.212 A03 III
- Issued
- Feb 5, 2018
- Penalty
- Initial $3,880 · Current $2,386 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(iii): Special hand tools for placing and removing material(s) was not provided to permit easy handling of material without the operator placing a hand in the danger zone: Location: Tool and Die Maker room On or about: 10/25/2017 a) The employer did not provide special hand tools for placing and removing material in the punch press danger zone.
Recent events (2)
- — I (S) $2386
- — Z (S) $3880
1910.219 D01
- Issued
- Feb 5, 2018
- Penalty
- Initial $3,880 · Current $2,386 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): On or about: 10/26/2017 Location: Tool and Die Maker room, South East Wall a) the two, four step 2 inch to 8 inch, pulleys on the Bridgeport milling machine were not guarded.
Recent events (2)
- — I (S) $2386
- — Z (S) $3880
More inspections at Oakley Metal Stamping INC.
View Oakley Metal Stamping INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332119)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342736063.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.