WATERFORD, PA —
OSHA Inspection: AUTOMATED CONCEPTS & TOOLING, INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of AUTOMATED CONCEPTS & TOOLING, INC. in 14500 WILLEY RD, WATERFORD, PA 16441 (NAICS 332999). OSHA activity number 342745221.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AUTOMATED CONCEPTS & TOOLING, INC.
- Site address
- 14500 WILLEY RD
- City
- WATERFORD
- State
- PA
- ZIP
- 16441
- Mailing
- 14500 WILLEY RD, WATERFORD, PA 16441
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 13
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A01
- Issued
- Dec 18, 2017
- Abate by
- Jan 16, 2018
- Penalty
- Initial $2,897 · Current $2,000 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a.) Automated Concepts & Tooling, Inc., Band saw area, On or about November 1st, 2017 and times prior thereto: Employees utilized a Roll-In brand vertical band saw that was not equipped with a guard to cover the unused portion of the saw blade and nip points created by the moving saw blade and blade guide rolls.
Recent events (2)
- — I (S) $2000
- — Z (S) $2897
1910.1200 E01
- Issued
- Dec 18, 2017
- Abate by
- Feb 6, 2018
- Penalty
- Initial $2,173 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: a) Automated Concepts & Tooling, Inc., Production areas, On or about November 1st, 2017 and times prior thereto: Employees worked with and around hazardous substances including, but not limited to, General purpose Lacquer Thinner (5700), and various grades of tool steel during work operations at the facility. The employer did not develop and maintain a written Hazard Communication Program.
Recent events (2)
- — I (S) $1000
- — Z (S) $2173
1910.1200 H01
- Issued
- Dec 18, 2017
- Abate by
- Feb 6, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: a) Automated Concepts & Tooling, Inc., Production areas, On or about November 1st, 2017 and times prior thereto: Employees worked with and around hazardous substances including, but not limited to, General purpose Lacquer Thinner (5700), and various grades of tool steel during work operations at the facility. The employer did not provide hazard communication training to employees onsite.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.242 B
- Issued
- Dec 18, 2017
- Abate by
- Jan 16, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: a.) Automated Concepts & Tooling, Inc., Wasino CNC Mill Machine area, On or about November 1st, 2017 and times prior thereto: Employees utilized compressed air to clean off items including, but not limited to metal parts. Measurements of compressed air at the Wasino CNC Mill Machine were measured at approximately 48 p.s.i.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 332999)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342745221.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.