CLARENDON, PA —
OSHA Inspection: ALLEGHENY TOOL MOLD & MANUFACTURING, INC.
Planned inspection · Health discipline
At a glance
On , OSHA opened a planned health inspection of ALLEGHENY TOOL MOLD & MANUFACTURING, INC. in 15300 ROUTE 6, CLARENDON, PA 16313 (NAICS 332999). OSHA activity number 342746914.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ALLEGHENY TOOL MOLD & MANUFACTURING, INC.
- Site address
- 15300 ROUTE 6
- City
- CLARENDON
- State
- PA
- ZIP
- 16313
- Mailing
- 15300 ROUTE 6, CLARENDON, PA 16313
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 11
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.1200 E01
- Issued
- Nov 9, 2017
- Abate by
- Jan 29, 2018
- Penalty
- Initial $1,630 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: a.) Allegheny Tool Mold & Manufacturing, Inc. - On or about November 2, 2017, and at times prior thereto: employees worked with or around hazardous substances including, but not limited to, degreasers, oils, lubricants, and carbon monoxide. The employer had not developed and implemented a written Hazard Communication Program.
Recent events (2)
- — I (S) $1000
- — Z (S) $1630
1910.1200 F06 II
- Issued
- Nov 9, 2017
- Abate by
- Jan 29, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(f)(6)(ii): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the product identifier and words, pictures, symbols, or combination thereof, which provide at least general information regarding the hazards of the chemicals and which, in conjunction with the other information immediately available to employees under the hazard communication program, would provide employees with the specific information regarding the physical and health hazards of the hazardous chemical: a.) Allegheny Tool Mold & Manufacturing, Inc. - On or about November 2, 2017, containers of hazardous chemicals including, but not limited to, Blaser Swisslube, located throughout, were not labeled with the identity and hazards of the hazardous chemical(s)contained therein.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 G08
- Issued
- Nov 9, 2017
- Abate by
- Jan 29, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(g)(8): The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical, and did not ensure that they were readily accessible during each work shift to employees when they were in their work area(s): a.) Allegheny Tool Mold & Manufacturing, Inc. - On or about November 2, 2017, and at times prior thereto: employees worked with or around hazardous substances including, but not limited to, degreasers, oils, lubricants, and carbon monoxide. Safety data sheets for hazardous chemicals including, but not limited to, Blaser Swisslube, Spray 9, and Way Oil ISO VG 6, were not maintained at the worksite nor was there a method/procedure in place to ensure SDSs could be provided to an employee requesting access to the document.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 H01
- Issued
- Nov 9, 2017
- Abate by
- Dec 29, 2017
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: a.) Allegheny Tool Mold & Manufacturing, Inc. - On or about November 2, 2017, and at times prior thereto: employees worked with or around hazardous substances including, but not limited to, degreasers, oils, lubricants, and carbon monoxide. Employees were not provided effective information and training about hazardous chemicals in the workplace.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections in this industry (NAICS 332999)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342746914.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.