SHAW, MS —
OSHA Inspection: COOK DRILLING COMAPNY, INC.
Federal Agency inspection · Safety discipline
At a glance
On , OSHA opened a federal Agency safety inspection of COOK DRILLING COMAPNY, INC. in 683 JONES BAYOU ROAD, SHAW, MS 38773 (NAICS 237110). OSHA activity number 342751674.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- COOK DRILLING COMAPNY, INC.
- Site address
- 683 JONES BAYOU ROAD
- City
- SHAW
- State
- MS
- ZIP
- 38773
- Mailing
- P. O. BOX 123, CLEVELAND, MS 38732
What kind of inspection was it?
- Inspection type
- Federal Agency (M)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 237110
- Employees
- 4
- Ownership type
- A
Citations
7 citations on file for this inspection.
1926.1408 A02
- Issued
- Apr 23, 2018
- Abate by
- May 15, 2018
- Penalty
- Initial $12,934 · Current $12,934
General-duty citation text
29 CFR 1926.1408(a)(2): The equipment's maximum working radius could get closer than 20 feet to a power line and the employer did not meet the requirements in Option (1), Option (2), or Option (3) of this section: (a) Jobsite - On or about November 03, 2017 the 42 feet long load connected to the hoist of a National 6T56 truck crane contacted an overhead 7620 volt power line. Employer did not take precautions for the crane operating within 20 feet of an overhead power line.
Recent events (1)
- — Z (S) $12934
1926.1425 C02
- Issued
- Apr 23, 2018
- Abate by
- May 15, 2018
- Penalty
- Initial $3,880 · Current $3,880
General-duty citation text
29 CFR 1926.1425(c)(2): Hooks with self-closing latches or their equivalent must be used. (a) Jobsite - On or about November 03, 2017 employees used a hook with a defective latch connected to a National 6T56 truck crane.
Recent events (1)
- — Z (S) $3880
1926.1430 A
- Issued
- Apr 23, 2018
- Abate by
- Jun 6, 2018
- Penalty
- Initial $3,880 · Current $3,880
General-duty citation text
29 CFR 1926.1430(a): Overhead power lines. The employer must train each employee specified in 1926.1408(g) and 1926.1410(m) in the topics listed in 1926.1408(g). (a) Jobsite - On or about November 03, 2017 employer did not train employees regarding the safe work practices when working less than 20 feet to a 7620 volt power line.
Recent events (1)
- — Z (S) $3880
1926.1433 D06
- Issued
- Apr 23, 2018
- Abate by
- May 15, 2018
- Penalty
- Initial $1,663 · Current $1,663
General-duty citation text
29 CFR 1926.1433(d)(6): 29 CFR 1926.1433(d)(6): An accessible fire extinguisher was not on the equipment. (a) Jobsite - On or about November 03, 2017 employees used a National 6T56 truck crane that did not have a fire extinguisher.
Recent events (1)
- — Z (S) $1663
1926.251 A02 I
- Issued
- Apr 23, 2018
- Abate by
- Jun 6, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.251(a)(2)(i): The employer failed to ensure rigging equipment had permanently affixed and legible identification markings as prescribed by the manufacturer that indicate the recommended safe working load. (a) Jobsite - On or about November 03, 2017 employees used a lifting bail attached to the hoist of a National 6T56 truck crane. The lifting bail was not identified with a tag with the recommended safe working load.
Recent events (1)
- — Z (O) $0
1926.1412 E03 I
- Issued
- Apr 23, 2018
- Abate by
- Jun 6, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1412(e)(3)(i): Monthly inspection information was not documented and maintained in accordance with subparagraphs (A) and (b) of this section: (a) Jobsite - On or about November 03, 2017 employer did not complete a monthly inspection on the National 6T56 truck crane.
Recent events (1)
- — Z (O) $0
1926.1412 F01
- Issued
- Apr 23, 2018
- Abate by
- Jun 6, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1412(f)(1): At least every 12 months the equipment must be inspected by a qualified person in accordance with paragraph (d) of this section (each shift) except that the corrective action set forth in paragraphs (f)(4), (f)(5), and (f)(6) of this section must apply in place of the corrective action required by paragraphs (d)(2) and (d)(3) of this section. (a) Jobsite - On or about November 03, 2017 employer did not complete an inspection by a qualified person on the National 6T56 truck crane.
Recent events (1)
- — Z (O) $0
More inspections in this industry (NAICS 237110)
More inspections in MS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342751674.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.