WHEELING, IL —
OSHA Inspection: ATR TRANSMISSION REMANUFACTURING, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of ATR TRANSMISSION REMANUFACTURING, INC. in 1019 NOEL AVE., WHEELING, IL 60090 (NAICS 811113). OSHA activity number 342768702.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ATR TRANSMISSION REMANUFACTURING, INC.
- Site address
- 1019 NOEL AVE.
- City
- WHEELING
- State
- IL
- ZIP
- 60090
- Mailing
- 1019 NOEL AVE., WHEELING, IL 60090
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 811113
- Employees
- 51
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.147 C04 I
- Issued
- Apr 4, 2018
- Abate by
- Apr 30, 2018
- Penalty
- Initial $6,467 · Current $6,400 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in the activities covered by this section: a) Machine Shop - On or about November 6, 2017, the employer did not ensure equipment-specific energy control procedures were utilized for the control of potentially hazardous energy during the servicing and maintenance task of filing debris from the chuck jaws on the Mori-Seiki Lathe Machine, model #SL-25B, serial #3775, which resulted in an internal bleeding injury in the operator's abdomen.
Recent events (3)
- — F (S) $6400
- — C (S) $6467
- — Z (S) $6467
1910.147 C04 II
- Issued
- Apr 4, 2018
- Abate by
- Apr 30, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(4)(ii): The energy control procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, including, but not limited to items (a) through (d) of this section: a) Machine Shop - On or about November 6, 2017, the employer did not ensure there was an equipment-specific energy control procedure for the servicing and maintenance task of filing debris from the chuck jaws on the Mori-Seiki Lathe Machine, model #SL-25B, serial #3775, that included a specific statement of the intended use of the procedure (servicing, maintenance, and/or filing), procedural steps for shutting down, isolating and securing the machine to control hazardous energy (electrical), procedural steps for the placement, removal and transfer of lockout devices or tagout devices and the responsibility for them, and specific requirements for testing the machine to determine and verify the effectiveness of the lockout devices, tagout devices and other energy control measures.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.147 D
- Issued
- Apr 4, 2018
- Abate by
- Apr 30, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d): The established procedure for the application of energy control (the lockout or tagout procedures) did not cover the actions listed in and was not done in sequence as required by 29 CFR 1910.147(d)(1)-(6): a) Machine Shop - On or about November 6, 2017, an employee was exposed to machine hazards associated with moving parts while performing a servicing and maintenance task of filing debris from the chuck jaws on the Mori-Seiki Lathe Machine, model #SL-25B, serial #3775. The employer failed to implement energy control application steps as the machine was not shut down or turned off out to perform the servicing work [per the 1910.147(d)(2) requirements]. As a result, the remaining applicable energy control elements, involving machine isolation [(d)(3)], LOTO device application [(d)(4)], dissipation of residual energy [(d)(5)(i)], and verification of isolation [(d)(6)], were not implemented to protect the employee from machine servicing hazards.
Recent events (3)
- — F (S) $0
- — C (S) $0
- — Z (S) $0
1910.147 C07 I
- Issued
- Apr 4, 2018
- Abate by
- Apr 30, 2018
- Penalty
- Initial $6,467 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that employees acquired the knowledge and skills required for the safe application, usage and removal of energy control devices: a) Machine Shop - On or about November 6, 2017, the employer did not ensure an employee performing the servicing and maintenance task of filing debris from the chuck jaws of the Mori-Seiki Lathe Machine, model #SL-25B, serial #3775, was trained as an Authorized employee to acquire the knowledge and skills needed for the safe application, usage, and removal of the energy controls.
Recent events (3)
- — F (S) $0
- — C (S) $6467
- — Z (S) $6467
1910.147 C06 I
- Issued
- Apr 4, 2018
- Abate by
- Apr 30, 2018
- Penalty
- Initial $726 · Current $400 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct an annual or more frequent inspection of the energy control procedure to ensure that the procedure and the requirements of this standard are being followed: a) A periodic inspection of the energy control procedure(s) was not performed at least annually to identify potential deficiencies and to ensure skill proficiency was maintained while utilizing the procedure(s).
Recent events (3)
- — F (O) $400
- — C (O) $726
- — Z (O) $726
More inspections in this industry (NAICS 811113)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342768702.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.