CINCINNATI, OH —
OSHA Inspection: EVALD ENTERPRISES, LLC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of EVALD ENTERPRISES, LLC in 2620 ROOKWOOD LANE, CINCINNATI, OH 45208 (NAICS 531110). OSHA activity number 342773074.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- EVALD ENTERPRISES, LLC
- Site address
- 2620 ROOKWOOD LANE
- City
- CINCINNATI
- State
- OH
- ZIP
- 45208
- Mailing
- 1849 MADISON RD., CINCINNATI, OH 45206
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 531110
- Employees
- 5
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.20 B02
- Issued
- Dec 7, 2017
- Abate by
- Jan 26, 2018
- Penalty
- Initial $3,803 · Current $0 Reduced
General-duty citation text
29 CFR 1926.20(b)(2): Such programs shall provide for frequent and regular inspections of the job sites, materials, and equipment to be made by competent persons designated by the employers. On November 15, 2017, located on the north east side of a residential roof, employees were observed installing a tarp onto the exterior steep roof structure as there were no frequent and regular inspections being performed by a competent person to ensure the job-site, materials and equipment such as a fall protection systems and/or devices were being maintained and utilized in a safe condition. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
- — I (S) $0
- — Z (S) $3803
1926.501 B13
- Issued
- Dec 7, 2017
- Abate by
- Jan 26, 2018
- Penalty
- Initial $3,803 · Current $0 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): "Residential construction." Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels shall be protected by guardrail systems, safety net system, or personal fall arrest system unless another provision in paragraph (b) of this section provides for an alternative fall protection measure. Exception: When the employer can demonstrate that it is infeasible or creates a greater hazard to use these systems, the employer shall develop and implement a fall protection plan which meets the requirements of paragraph (k) of 1926.502. Note: There is a presumption that it is feasible and will not create a greater hazard to implement at least one of the above-listed fall protection systems. Accordingly, the employer has the burden of establishing that it is appropriate to implement a fall protection plan which complies with 1926.502(k) for a particular workplace situation, in lieu of implementing any of those systems. On November 15, 2017 located on the north east side of a residential roof, employees were exposed to a fall hazard while performing roofing work on a steep pitch roof not utilizing any fall protection system. Potential fall height measured to be 13-7. Roof pitch was measured to be 12/12. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
- — I (S) $0
- — Z (S) $3803
1926.502 A02
- Issued
- Dec 7, 2017
- Abate by
- Jan 26, 2018
- Penalty
- Initial $3,803 · Current $0 Reduced
General-duty citation text
29 CFR 1926.502(a)(2): Employers shall provide and install all fall protection systems required by this subpart for an employee, and shall comply with all other pertinent requirements of this subpart before that employee begins the work that necessitates the fall protection. On November 15, 2017, located on the north east side of a residential structure, the employer failed to install a fall protection system prior to an employees performing roofing work such as installing tarps onto a steep residential roof structure. Potential fall height was measured to be 13'-7". Roof pitch measured to be 12/12. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence, or written records.
Recent events (2)
- — I (S) $0
- — Z (S) $3803
More inspections in this industry (NAICS 531110)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342773074.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.