Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: A-1 SOUTHERN IRONWORKS, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of A-1 SOUTHERN IRONWORKS, INC. in 936 FLORIDA BLVD. S.E., DENHAM SPRINGS, LA 70726 (NAICS 331222). OSHA activity number 342778370.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch A-1 Southern Ironworks, INC. — free Get an email when a new federal OSHA severe-injury report for A-1 Southern Ironworks, INC. is published. One employer, no account, unsubscribe in one click.
Site address
936 FLORIDA BLVD. S.E.
City
DENHAM SPRINGS
State
LA
ZIP
70726
Mailing
936 FLORIDA BLVD. S.E., DENHAM SPRINGS, LA 70726
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
331222
Employees
3
Ownership type
A

5 citations on file for this inspection.

1910.305 B01 II

Serious Gravity 5 2 instances 1 exposed
Issued
Dec 15, 2017
Abate by
Dec 27, 2017
Penalty
Initial $2,173 · Current $1,087 Reduced
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed:     On or about November 14,207 the employer allowed several unused breaker openings to be present in the electrical panel located in the storage area and in the following areas:  Instance A) storage room and  Instance B) fabrication area of the shop.
Recent events (2)
  • — I (S) $1086.5
  • — Z (S) $2173

1910.215 A04

Serious Gravity 5 1 instance 1 exposed
Issued
Dec 15, 2017
Abate by
Dec 27, 2017
Penalty
Initial $2,716 · Current $1,358 Reduced
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch:    On or about November 14, 2017, the employer allowed an employee to use a Dayton 10" bench grinder on which the tool rest was not adjusted to 1/8" of an inch from the grinding wheel. The measured distance was 1 1/4 of an inch.
Recent events (2)
  • — I (S) $1358
  • — Z (S) $2716

1910.215 B09

Serious Gravity 5 1 instance 1 exposed
Issued
Dec 15, 2017
Abate by
Dec 27, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch:  On or about November 14, 2017, the employer allowed an employee to use the Dayton 10" bench grinder, located in the fabrication area to buff the welds without a tongue guard.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.178 L06

Other-than-serious 1 instance 1 exposed
Issued
Dec 15, 2017
Abate by
Dec 27, 2017
Penalty
Initial $0 · Current $0
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l):  On or about November 14, 2017, the employer failed to verify that the operator of the powered industrial truck was certified to operate the equipment.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.253 B04 III

Other-than-serious 1 instance 1 exposed
Issued
Dec 15, 2017
Abate by
Dec 27, 2017
Penalty
Initial $2,716 · Current $0 Reduced
29 CFR 1910.253(b)(4)(iii): Oxygen cylinders in storage were not separated from fuel-gas cylinders or combustible materials (especially oil or grease), a minimum distance of 20 feet (6.1 m) or by a noncombustible barrier at least 5 feet (1.5 m) high having a fire-resistance rating of at least one-half hour:    On or about November 14, 2017, the employer allowed the oxygen and fuel gas cylinders to be stored together without a twenty foot separation or a noncombustible barrier of at least five feet tall with a fire-resistance rating of at least one-half hour.
Recent events (2)
  • — I (O) $0
  • — Z (S) $2716

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342778370.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.