BOISE, ID —
OSHA Inspection: GREAT BASIN INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of GREAT BASIN INC. in 5208 W IRVING ST, BOISE, ID 83706 (NAICS 424990). OSHA activity number 342802535.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- GREAT BASIN INC.
- Site address
- 5208 W IRVING ST
- City
- BOISE
- State
- ID
- ZIP
- 83706
- Mailing
- 5208 W IRVING ST, BOISE, ID 83706
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 424990
- Employees
- 10
- Ownership type
- A
Citations
5 citations on file for this inspection.
5(a)(1)
- Issued
- Dec 18, 2017
- Abate by
- Feb 6, 2018
- Penalty
- Initial $2,173 · Current $1,087 Reduced
General-duty citation text
OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the struck-by or crushing hazards when operating a forklift without the use of a restraint device: (a) Warehouse: On or about November 30, 2017 and at times prior thereto; the employer did not provide a seatbelt for the operator(s) of the Caterpillar, Model T30D, S/N 5GB02513. (b) Warehouse: On or about November 30, 2017 and at times prior thereto; the employer did not provide a seatbelt for the operator(s) of the Caterpillar, Model M40D, S/N 4WC439. NOTE: Abatement certification IS required for this item.
Recent events (2)
- — I (S) $1086.5
- — Z (S) $2173
1910.178 A06
- Issued
- Dec 18, 2017
- Abate by
- Feb 6, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(a)(6): The employer did not ensure that all nameplates or markings were not maintained in a legible condition: (a) Warehouse, on or about November 30, 2017 and at times prior thereto, the employer did not ensure that the data plate on the Caterpillar Model M40D was legible. NOTE: Abatement certification IS required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L01 II
- Issued
- Dec 18, 2017
- Abate by
- Feb 6, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(1)(ii): The employer did not ensure that each operator had successfully completed the training required by paragraph (l), except as permitted by paragraph (l)(5), prior to permitting an employee to operate a power industrial truck: (a) On or about November 30, 2017 and at times prior thereto: the employer did not provide training to an employee operating forklifts in the warehouse. NOTE: Abatement certification IS required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 Q07
- Issued
- Dec 18, 2017
- Abate by
- Jan 16, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service. Such examination was not made at least daily. (a) Warehouse, on or about November 30, 2017 and at times prior thereto the employer failed to ensure that all powered industrial trucks, such as the Caterpillar T30D and Caterpillar M40D were examined prior to use. NOTE: Abatement certification IS required for this item.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.151 C
- Issued
- Dec 18, 2017
- Abate by
- Jan 16, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use: (a) Warehouse, on or about November 30, 2017 and at times prior thereto; the employer did not provide suitable facilities for the quick drenching or flushing of the eyes for immediate emergency use where employees may be exposed to corrosive materials while checking the levels in and adding water to batteries on the Caterpillar Model M40D. NOTE: Abatement certification IS required for this item.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 424990)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342802535.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.