Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: BANUELAS QUALITY CONSTRUCTION

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of BANUELAS QUALITY CONSTRUCTION in 2411 HIGHWAY 80 W, JACKSON, MS 39204 (NAICS 238130). OSHA activity number 342806593.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Banuelas Quality Construction — free Get an email when a new federal OSHA severe-injury report for Banuelas Quality Construction is published. One employer, no account, unsubscribe in one click.
Site address
2411 HIGHWAY 80 W
City
JACKSON
State
MS
ZIP
39204
Mailing
110 CHILDRE RD LOT 5, PEARL, MS 39208
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
6
Ownership type
A

4 citations on file for this inspection.

1926.102 A02

Serious Gravity 5 3 instances 3 exposed
Issued
Dec 21, 2017
Abate by
Dec 26, 2017
Penalty
Initial $2,173 · Current $2,173
29 CFR 1926.102(a)(2): The employer shall ensure that each affected employee uses eye protection that provides side protection when there is a hazard from flying objects. Detachable side protectors (e.g. clip-on or slide-on side shields) meeting the pertinent requirements of this section are acceptable.  (a)   Roof in front of the building - On or about November 28, 2017 employees were exposed to a flying object hazard while using nail guns and circular saw.  These employees were not wearing eye protection. The employer did not enforce the wear safety glasses on this job-site.
Recent events (1)
  • — Z (S) $2173

1926.451 C02 IV

Serious Gravity 10 12 instances 3 exposed
Issued
Dec 21, 2017
Abate by
Dec 26, 2017
Penalty
Initial $3,803 · Current $3,803
29 CFR 1926.451(c)(2)(iv): Front-end loaders and similar pieces of equipment shall not be used to support scaffold platforms unless they have been specifically designed by the manufacturer for such use.  (a) Roof in front of the building - On or about November 28, 2017 employees were exposed to fall, struck-by, and crushing hazards while riding on an unauthorized platform used as a scaffold. This pallet was elevated 16 feet 9 inches above the ground by a Caterpillar TL 1055D Forklift serial no. JR5929. This pallet was not designed by the manufacturer to be used as a platform to transport employees.
Recent events (1)
  • — Z (S) $3803

1926.451 C02 V

Serious Gravity 10 12 instances 3 exposed
Issued
Dec 21, 2017
Abate by
Dec 26, 2017
Penalty
Initial $0 · Current $0
29 CFR 1926.451(c)(2)(v): Fork-lifts shall not be used to support scaffold platforms unless the entire platform is attached to the fork and the fork-lift is not moved horizontally while the platform is occupied.   (a)  Roof in front of the building - On or about November 28, 2017 employees were exposed to fall, struck-by, and crushing hazards while riding on an unauthorized platform used as a scaffold. This pallet was elevated 16 feet 9 inches above the ground by a Caterpillar TL 1055D Forklift serial no. JR5929.  This pallet was not secured to the forklift.
Recent events (1)
  • — Z (S) $0

1926.501 B01

Serious Gravity 10 3 instances 3 exposed
Issued
Dec 21, 2017
Abate by
Dec 26, 2017
Penalty
Initial $3,803 · Current $3,803
29 CFR 1926.501(b)(1): "Unprotected sides and edges." Each employee on a walking/working surface (horizontal and vertical surface) with an unprotected side or edge which is 6 feet (1.8 m) or more above a lower level shall be protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.  (a)  Roof in front of the building - On or about November 28, 2017 employees were exposed to fall while working on a flat- roof 16 feet 9 inches above the ground with no fall protection.
Recent events (1)
  • — Z (S) $3803

View Banuelas Quality Construction's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342806593.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.