BROOKFIELD, WI —
OSHA Inspection: PENZEYS, LTD.
Federal Agency inspection · Safety discipline
At a glance
On , OSHA opened a federal Agency safety inspection of PENZEYS, LTD. in 19300 WEST JANACEK COURT, BROOKFIELD, WI 53045 (NAICS 311942). OSHA activity number 342813508.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PENZEYS, LTD.
- Site address
- 19300 WEST JANACEK COURT
- City
- BROOKFIELD
- State
- WI
- ZIP
- 53045
- Mailing
- 12001 W. CAPITOL DR., WAUWATOSA, WI 53222
What kind of inspection was it?
- Inspection type
- Federal Agency (M)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 311942
- Employees
- 50
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C01
- Issued
- Apr 13, 2018
- Abate by
- May 9, 2018
- Penalty
- Initial $9,239 · Current $9,239
General-duty citation text
29 CFR 1910.147(c)(1): Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative. (a) The employer did not establish and implement a written energy control program consisting of energy control procedures, employee training and/or periodic inspections for equipment such as but not limited to the Tannewitz Tilting Arbor Mitre Table Saw and the Tannewitz Band Saw.
Recent events (2)
- — I (S) $9239
- — Z (S) $9239
1910.147 C04 I
- Issued
- Apr 13, 2018
- Abate by
- May 9, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: (a) The employer had not developed, documented or utilized procedures for the control of potentially hazardous energy when employees change saw blades on but not limited to the Tannewitz Tilting Arbor Mitre Table Saw (model no. J-250, serial no. 8078) and the Tannewitz Band Saw (model no. GH, serial no. 14502).
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C07 I
- Issued
- Apr 13, 2018
- Abate by
- May 9, 2018
- Penalty
- Initial $9,239 · Current $9,239
General-duty citation text
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees: (a) The employer did not ensure that lockout/tagout training was provided for personnel who are being exposed to electrical, pneumatic, hydraulic, and gravitational energy sources on equipment such as but not limited to the Tannewitz Tilting Arbor Mitre Table Saw (model no. J-250, serial no. 8078) and the Tannewitz Band Saw (model no. GH, serial no. 14502).
Recent events (2)
- — I (S) $9239
- — Z (S) $9239
1910.213 C01
- Issued
- Apr 13, 2018
- Abate by
- Apr 25, 2018
- Penalty
- Initial $9,239 · Current $9,239
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut. (a) The Tannewitz Tilting Arbor Miter Table Saw blade was not guarded by an automatically adjusting hood as required. This exposed employees to amputation injuries.
Recent events (2)
- — I (S) $9239
- — Z (S) $9239
1910.213 C02
- Issued
- Apr 13, 2018
- Abate by
- Apr 25, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Handfed circular saw(s) were not furnished with a spreader to prevent materials from squeezing the saw or being thrown back on the operator: (a) The Tannewitz Tilting Arbor Miter Table Saw was used by an employee without a spreader to prevent materials from squeezing the saw or being thrown back on the operator.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 C03
- Issued
- Apr 13, 2018
- Abate by
- Apr 25, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed circular ripsaw(s) did not have nonkickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: (a) The Tannewitz Tilting Arbor Miter Table Saw was used by an employee without kickback fingers or dogs to prevent materials from being picked up and thrown back on the operator.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Penzeys, LTD.
View Penzeys, LTD.'s full OSHA safety record →
More inspections in this industry (NAICS 311942)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342813508.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.