Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: BRA-VOR TOOL AND DIE COMPANY INC.

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of BRA-VOR TOOL AND DIE COMPANY INC. in 11189 MURRAY ROAD, MEADVILLE, PA 16335 (NAICS 332999). OSHA activity number 342831906.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Bra-Vor Tool and DIE Company INC. — free Get an email when a new federal OSHA severe-injury report for Bra-Vor Tool and DIE Company INC. is published. One employer, no account, unsubscribe in one click.
Site address
11189 MURRAY ROAD
City
MEADVILLE
State
PA
ZIP
16335
Mailing
11189 MURRAY ROAD, MEADVILLE, PA 16335
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332999
Employees
13
Ownership type
A

4 citations on file for this inspection.

1910.106 D02 I

Serious Gravity 1 1 instance 4 exposed
Issued
Dec 18, 2017
Abate by
Jan 16, 2018
Penalty
Initial $1,662 · Current $1,662
29 CFR 1910.106(d)(2)(i): Approved containers and/or portable tanks were not used for the storage of flammable liquids:     a.)Bra-Vor Tool & Die Co., Inc., Inspection room area, on or about December 14th, 2017 and times prior thereto:  The employer did not store a category 2 flammable liquid (DyKem remover/thinner) in an approved container.  The Dykem remover/thinner was stored in a plastic bottle onsite.
Recent events (1)
  • — Z (S) $1662

1910.1200 F06 II

Serious Gravity 1 1 instance 4 exposed
Issued
Dec 18, 2017
Abate by
Jan 16, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(f)(6)(ii): Except as provided in 29 CFR 1910.1200(f)(7) and 29 CFR 1910.1200(f)(8), the employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the product identifier and words, pictures, symbols, or combination thereof, which provide at least general information regarding the hazards of the chemicals and which, in conjunction with the other information immediately available to employees under the hazard communication program, would provide employees with the specific information regarding the physical and health hazards of the hazardous chemical:    a.)Bra-Vor Tool & Die Co., Inc., Inspection room area, on or about December 14th, 2017 and times prior thereto:  Secondary containers of products including, but not limited to, Dykem remover and thinner were not labeled with a product identifier nor with the hazards of the hazardous chemical(s) contained therein.
Recent events (1)
  • — Z (S) $0

1910.1200 H03 IV

Other-than-serious 1 instance 7 exposed
Issued
Dec 18, 2017
Abate by
Jan 16, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(h)(3)(iv): Employees had not been provided with Hazard Communication 2012 training including an explanation of the labels received on shipped containers and the workplace labeling system to be used by their employer; the safety data sheet, including the order of information, and how employees can obtain and use the appropriate hazard information:    a.)Bra-Vor Tool & Die Co., Inc., Production areas, on or about December 14th, 2017 and times prior thereto:  Employees were working with and around hazardous substances including, but not limited to, Dykem remover and thinner, and various grades of steel.  Employees had not received training on the new labeling elements and safety data sheets in CFR 1910.1200(j)(1) of the Hazard Communication 2012 Standard.
Recent events (1)
  • — Z (O) $0

1910.1200 G01

Other-than-serious 1 instance 7 exposed
Issued
Dec 18, 2017
Abate by
Jan 16, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.1200(g)(1): Employers did not have a safety data sheet in the workplace for each hazardous chemical which they use:     a.)Bra-Vor Tool & Die Co.,Inc., Production areas, on or about December 14th, 2017 and times prior thereto:  Employees worked with and around hazardous substances including, but not limited to Dykem remover and thinner and various grades of steel during work operations onsite.  The employer did not make available a Safety Data Sheet for the Dykem remover and thinner or the steel used onsite.
Recent events (1)
  • — Z (O) $0

View Bra-Vor Tool and DIE Company INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342831906.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.