Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: AMERICAN BUILDERS & CONTRACTORS SUPPLY CO., INC.

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of AMERICAN BUILDERS & CONTRACTORS SUPPLY CO., INC. in 115 SW 49TH AVE, OCALA, FL 34474 (NAICS 444190). OSHA activity number 342836608.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch American Builders & Contractors Supply CO., INC. — free Get an email when a new federal OSHA severe-injury report for American Builders & Contractors Supply CO., INC. is published. One employer, no account, unsubscribe in one click.
Site address
115 SW 49TH AVE
City
OCALA
State
FL
ZIP
34474
Mailing
115 SW 49TH AVE, OCALA, FL 34474
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
444190
Employees
7
Ownership type
A

5 citations on file for this inspection.

1910.212 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Feb 21, 2018
Abate by
Mar 19, 2018
Penalty
Initial $9,240 · Current $5,544 Reduced
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  a) On or about December 15, 2017: Employees were operating the PAN Machine and at the feeding section the shear press was not provided with a guard to protect operators from getting into the point of operation. Employees are exposed to an amputation hazard.
Recent events (2)
  • — I (S) $5544
  • — Z (S) $9240

1910.219 F03

Serious Gravity 5 3 instances 2 exposed
Issued
Feb 21, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven -7 feet or less above floors or platforms were not enclosed:  a) On or about December 15, 2017: Chains and sprockets at the PAN Machine next to the Shear press section were not guarded, exposing employees to a amputation hazard.   b) On or about December 15, 2017: Chains and sprockets at the Gutter Machine were not enclosed, exposing employees to an amputation hazard.   c) On or about December 15, 2017: Chains and sprockets at the Fascia Machine were not enclosed, exposing employees to an amputation hazard.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.36 D01

Other-than-serious 1 instance 2 exposed
Issued
Feb 21, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.36(d)(1): Employee(s) were not able to open an exit route door from the inside at all times without keys, tools, or special knowledge:  a) On or about December 15, 2017: The emergency door located at the front loading dock was locked from the inside with a door deadlock.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.36 G02

Other-than-serious 1 instance 2 exposed
Issued
Feb 21, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.36(g)(2): Exit access(es) were not at least 28 inches (71.1 cm) wide at all points.  a) On or about December 15, 2017: The exit access was reduced by placing products on its way, limiting egress.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.147 C04 I

Other-than-serious 3 instances 2 exposed
Issued
Feb 21, 2018
Abate by
Mar 19, 2018
Penalty
Initial $0 · Current $0
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section:  a) On or about December 15, 2017: The employer had not developed specific lockout/tagout for machine such as but not limited to PAN Machine, Gutter Machine, and Fascia Machine.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View American Builders & Contractors Supply CO., INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342836608.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.