PRAIRIE DU CHIEN, WI —
OSHA Inspection: DILLMAN EQUIPMENT, INC.
Unprogrammed Related inspection · Safety discipline
At a glance
On , OSHA opened an unprogrammed Related safety inspection of DILLMAN EQUIPMENT, INC. in 34600 COUNTY HIGHWAY K, PRAIRIE DU CHIEN, WI 53821 (NAICS 333120). OSHA activity number 342836806.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DILLMAN EQUIPMENT, INC.
- Site address
- 34600 COUNTY HIGHWAY K
- City
- PRAIRIE DU CHIEN
- State
- WI
- ZIP
- 53821
- Mailing
- 34600 COUNTY HIGHWAY K, PRAIRIE DU CHIEN, WI 53821
What kind of inspection was it?
- Inspection type
- Unprogrammed Related (G)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333120
- Employees
- 140
- Ownership type
- A
Citations
9 citations on file for this inspection.
1910.107 E04
- Issued
- May 23, 2018
- Penalty
- Initial $12,934 · Current $12,934
General-duty citation text
29 CFR 1910.107(e)(4): The withdrawal of flammable liquids or liquids with a flashpoint greater than 199.4 °F (93 °C) from containers and the filling of containers, including portable mixing tanks, was not done only in a suitable mixing room or in a spraying area when the ventilating system was in operation and adequate precaution shall be taken to protect against sources of ignition: On or about December 06, 2017, the airless paint system was dispensing flammable liquids from an ungrounded and bonded metal 55 gallon drum.
Recent events (2)
- — I (S) $12934
- — Z (S) $12934
1910.107 G03
- Issued
- May 23, 2018
- Abate by
- Jun 21, 2018
- Penalty
- Initial $9,239 · Current $9,239
General-duty citation text
29 CFR 1910.107(g)(3): Rags or waste impregnated with finishing material were not deposited in metal waste cans immediately after use: On or about December 06, 2017, impregnated rags and waste paint material were disposed of in a non-fire rated plastic waste container.
Recent events (2)
- — I (S) $9239
- — Z (S) $9239
1910.133 A05
- Issued
- May 23, 2018
- Abate by
- Jun 21, 2018
- Penalty
- Initial $12,934 · Current $12,934
General-duty citation text
29 CFR 1910.133(a)(5): The employer did not ensure that each affected employee used equipment with filter lenses that had a shade number appropriate for the work being performed, for protection from injurious light radiation. On or about December 06, 2018, plasma cutter operators were not provided shade 8 eye protection.
Recent events (2)
- — I (S) $12934
- — Z (S) $12934
1910.134 F02
- Issued
- May 23, 2018
- Penalty
- Initial $9,239 · Current $9,239
General-duty citation text
29 CFR 1910.134(f)(2): Employee(s) using a tight-fitting facepiece respirator were not annually fit tested: On or about November 30, 2017, employees wearing, mandatory, elastomeric respirator and filtering face pieces were not annually fit tested. a. In the paint booth, the painter was wearing an elastomeric respirator and was not fit tested.
Recent events (2)
- — I (S) $9239
- — Z (S) $9239
1910.137 C02 VIII
- Issued
- May 23, 2018
- Penalty
- Initial $9,239 · Current $0 Reduced
General-duty citation text
29 CFR 1910.137(c)(2)(viii): Electrical protective equipment was not subjected to periodic electrical tests. Test voltages and/or the maximum intervals between tests were not conducted in accordance with Table I-4 and Table I-5. On or about December 06, 2017, the employees were exposed to a electrical shock hazard when using electrical gloves that were outside the six month periodic electrical test interval.
Recent events (2)
- — I (S) $0
- — Z (S) $9239
1910.212 A03 II
- Issued
- May 23, 2018
- Abate by
- Jul 13, 2018
- Penalty
- Initial $12,934 · Current $6,467 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): On or about the period between November 27 to December 12, 2017, employees were exposed to crushing hazards when operating Geka Hydracrop 150/S punch.
Recent events (2)
- — I (S) $6467
- — Z (S) $12934
1910.252 B02 III
- Issued
- May 23, 2018
- Abate by
- Jul 13, 2018
- Penalty
- Initial $9,239 · Current $9,239
General-duty citation text
29 CFR 1910.252(b)(2)(iii): Workers and other persons adjacent to the welding area were not protected from the rays by noncombustible or flameproof screens or shields: On or about December 06, 2017 employees were not protected from welding rays emitting from the plasma cutting tables and employees MIG welding in the main building and building 9.
Recent events (2)
- — I (S) $9239
- — Z (S) $9239
1910.335 A01 I
- Issued
- May 23, 2018
- Abate by
- Jun 21, 2018
- Penalty
- Initial $12,934 · Current $6,467 Reduced
General-duty citation text
29 CFR 1910.335(a)(1)(i): Employees working in areas where there were potential electrical hazards were not provided with electrical protective equipment that was appropriate for the specific parts of the body that needed to be protected and for the work being performed: On or about December 06, 2017 employees were checking voltage on 480 VAC without arc flash personal protective equipment.
Recent events (2)
- — I (S) $6467
- — Z (S) $12934
1910.1200 H03
- Issued
- May 23, 2018
- Abate by
- Jun 21, 2018
- Penalty
- Initial $9,239 · Current $9,239
9130
General-duty citation text
29 CFR 1910.1200(h)(3): The employee training did not include the requirements of 29 CFR 1910.1200(h)(3)(i) through (h)(3)(iv): On or about November 30, 2017, employees did not receive effective training on the occupational health hazards in their work area: a. Abrasives blasters did not receive training on black diamond abrasive blast media and carbon monoxide. b. Painters did not receive training on the effects of chemicals in paints.
Recent events (2)
- — I (S) $9239
- — Z (S) $9239
More inspections at Dillman Equipment, INC.
View Dillman Equipment, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 333120)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342836806.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.