WEST WAREHAM, MA —
OSHA Inspection: QUALITY WOOD PRODUCTS INC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of QUALITY WOOD PRODUCTS INC in 2380 CRANBERRY HWY, WEST WAREHAM, MA 02576 (NAICS 321999). OSHA activity number 342849114.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- QUALITY WOOD PRODUCTS INC
- Site address
- 2380 CRANBERRY HWY
- City
- WEST WAREHAM
- State
- MA
- ZIP
- 02576
- Mailing
- 2380 CRANBERRY HWY, WEST WAREHAM, MA 02576
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321999
- Employees
- 8
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.212 A01
- Issued
- Jan 11, 2018
- Penalty
- Initial $2,003 · Current $1,002 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: Shop: The Hitachi miter saw did not have a guard for the lower portion of the blade.
Recent events (2)
- — I (S) $1001.5
- — Z (S) $2003
1910.213 C01
- Issued
- Jan 11, 2018
- Penalty
- Initial $2,003 · Current $1,002 Reduced
General-duty citation text
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut. Shop: The two Grizzly table saws did not have a hood guard over the blade.
Recent events (2)
- — I (S) $1001.5
- — Z (S) $2003
1910.213 C02
- Issued
- Jan 11, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: Shop: The two Grizzly table saws did not have spreaders.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 C03
- Issued
- Jan 11, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: Shop: The two Grizzly table saws did not have non kickback fingers.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.213 H01
- Issued
- Jan 11, 2018
- Penalty
- Initial $2,003 · Current $1,002 Reduced
General-duty citation text
29 CFR 1910.213(h)(1): The sides of the lower exposed portion of the blade of radial saw(s) were not guarded to the full diameter of the blade by a device that automatically adjusted itself to the thickness of the stock and remained in contact with the material being cut. Shop: The Delta radial arm saw did not have a guard on the lower portion of the blade.
Recent events (2)
- — I (S) $1001.5
- — Z (S) $2003
1910.213 H03
- Issued
- Jan 11, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.213(h)(3): Radial saw(s) were not provided with an adjustable stop to prevent the forward travel of the blade beyond the position necessary to complete the cut in repetitive operations: Shop: The Delta radial arm was able to operate past the work table allowing the blade move beyond the position to complete a cut.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 E01
- Issued
- Jan 11, 2018
- Abate by
- Mar 5, 2018
- Penalty
- Initial $1,413 · Current $707 Reduced
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f) labeling , (g) safety data sheets, and (h) information and training will be met: Shop: A written hazard communication program was not developed and implemented where glues and stains were used and wood dust generated during fabrication processes.
Recent events (2)
- — I (S) $706.5
- — Z (S) $1413
More inspections at Quality Wood Products INC
View Quality Wood Products INC's full OSHA safety record →
More inspections in this industry (NAICS 321999)
More inspections in MA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342849114.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.