TARPON SPRINGS, FL —
OSHA Inspection: J SQUARED MARINA MANAGEMENT SERVICES, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of J SQUARED MARINA MANAGEMENT SERVICES, LLC in 527 ANCLOTE RD #200, TARPON SPRINGS, FL 34689 (NAICS 713930). OSHA activity number 342849825.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- J SQUARED MARINA MANAGEMENT SERVICES, LLC
- Site address
- 527 ANCLOTE RD #200
- City
- TARPON SPRINGS
- State
- FL
- ZIP
- 34689
- Mailing
- 527 ANCLOTE RD #200, TARPON SPRINGS, FL 34689
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 713930
- Employees
- 15
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.178 A06
- Issued
- Mar 21, 2018
- Abate by
- May 4, 2018
- Penalty
- Initial $2,956 · Current $1,478 Reduced
General-duty citation text
29 CFR 1910.178(a)(6): The employer did not ensure that all nameplates or markings were maintained in a legible condition: a. On or about 12/20/2017, at the job site - the Caterpillar forklift capacity plate information was not legible because the data plate was covered with paint. This forklift is used to lift and move boats and weight ranges from 6,000 to 10,000 pounds.
Recent events (2)
- — I (S) $1478
- — Z (S) $2956
1910.178 L01 II
- Issued
- Mar 21, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(1)(ii): The employer did not ensure that each operator had successfully completed the training required by paragraph (l), except as permitted by paragraph (l)(5), prior to permitting an employee to operate a a. On or about 12/20/2017, at the job site - employees were exposed to forklift related hazards, in that, forklift operators were not certified or trained to operate the counter balance sit-down forklifts at least once every three years.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 P01
- Issued
- Mar 21, 2018
- Abate by
- Apr 2, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition(s): a. On or about 12/20/2017, at the job site - employees were exposed to forklift related hazards such as falling or being ejected from the forklift, in that, the forklift was not removed from service after defects were found, and had been operated while the seat belt was missing from two forklifts.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.176 A
- Issued
- Mar 21, 2018
- Abate by
- Apr 2, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.176(a): Permanent aisles or passageways were not appropriately marked: a. On or about 12/20/2017, at the boat storage barns - employees were exposed to struck-by and or crush-in hazards from forklift traffic, in that, there is not a designated permanent and marked walkway for pedestrians.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 713930)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342849825.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.