Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: RK MECHANICAL INC

Unprogrammed Related inspection · Safety discipline

On , OSHA opened an unprogrammed Related safety inspection of RK MECHANICAL INC in 2001 BLAKE STREET, DENVER, CO 80205 (NAICS 238210). OSHA activity number 342857489.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch RK Mechanical INC — free Get an email when a new federal OSHA severe-injury report for RK Mechanical INC is published. One employer, no account, unsubscribe in one click.
Establishment
RK MECHANICAL INC
Site address
2001 BLAKE STREET
City
DENVER
State
CO
ZIP
80205
Mailing
3800 XANTHIA STREET, DENVER, CO 80238
Inspection type
Unprogrammed Related (G)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238210
Employees
2
Ownership type
A

3 citations on file for this inspection.

1926.501 B01

Deleted Serious Gravity 5 1 instance 2 exposed
Issued
Feb 2, 2018
Penalty
Initial $5,654 · Current $0 Reduced
29 CFR 1926.501(b)(1): Each employee on a walking/working surface having an unprotected side or edge which was six feet (1.8m) or more above a lower level was not protected from falling by the use of a guardrail system, a safety net system, or personal fall arrest system:  (a)  RK Mechanical Inc, dba RK Electrical, at 2001 Blake Street, Denver, CO: On and preceding 1/2/18, RK Mechanical Inc did not ensure that each employee on a walking/working surface having an unprotected side or edge which was six feet (1.8m) or more above a lower level was protected from falling by the use of a guardrail system, a safety net system, or personal fall arrest system.  Employees performed electrical work in preparation of installation of a scoreboard.  Work took place on multiple levels, including the first level, second level, and sixth level, above the concrete walkway at the base of the steel structure.  A 3/8 inch wire rope was strung across each level at the exposed edge, spanning approximately 119 feet.  Four foot deep vertical structural steel divided each level at the exposed edge into three zones.  Employees were provided DBI/SALA full body harnesses with DBI/SALA Nano-Lok single leg self-retracting lifelines (SRL).  The SRL was connected to the 3/8 inch wire rope.  Employees disconnected from the wire rope when traveling between zones, passing the vertical structure steel prior to re-connecting to the wire rope on the other side of the vertical structural steel.  The employer did not ensure that employees were protected from a fall when traveling between zones.  This condition exposed employees to approximate 15.5 foot, 24 foot, and 58.5 foot fall hazards.
Recent events (2)
  • — I (S) $0
  • — Z (S) $5654

1926.502 D08

Other-than-serious 1 instance 2 exposed
Issued
Feb 2, 2018
Penalty
Initial $0 · Current $5,654
29 CFR 1926.502(d)(8): Horizontal lifelines were not designed, installed, and used under the supervision of a qualified person, as part of a complete personal fall arrest system, which maintained a safety factor of at least two:    (a)  RK Mechanical Inc, dba RK Electrical, at 2001 Blake Street, Denver, CO: On and preceding 1/2/18, RK Mechanical Inc did not ensure that a horizontal lifeline was designed, installed, and used under the supervision of a qualified person, as part of a complete personal fall arrest system, which maintained a safety factor of at least two.  Employee performed electrical work in preparation of installation of a scoreboard.  Work took place on multiple levels, including the first level, second level, and sixth level, above the concrete walkway at the base of the steel structure.  A 3/8 inch wire rope was strung across each level at the exposed edge, spanning approximately 119 feet.  Employee was provided DBI/SALA full body harnesses with DBI/SALA Nano-Lok single leg self-retracting lifelines (SRL).  The SRL was connected to the 3/8 inch wire rope.  The employer did not ensure that a qualified person supervised the use of the 3/8 inch wire rope being utilized as a horizontal lifeline.  This condition exposed employee to approximate 15.5 foot, 24 foot, and 58.5 foot fall hazards.
Recent events (2)
  • — I (O) $5654
  • — Z (S) $0

1926.503 C02

Other-than-serious 1 instance 2 exposed
Issued
Feb 2, 2018
Abate by
Feb 22, 2018
Penalty
Initial $0 · Current $0
29 CFR 1926.503(c)(2):  The employer did not retrain affected employees where changes in the type of fall protection systems or equipment to be used rendered previous training obsolete:    (a)  RK Mechanical Inc, dba RK Electrical, at 2001 Blake Street, Denver, CO: On and preceding 1/2/18, RK Mechanical Inc did not retrain affected employee where changes in the type of fall protection systems or equipment to be used rendered previous training obsolete.  Employees performed electrical work in preparation of installation of a scoreboard.  Work took place on multiple levels, including the first level, second level, and sixth level, above the concrete walkway at the base of the steel structure.  A 3/8 inch wire rope was strung across each level at the exposed edge, spanning approximately 119 feet.  Employee was provided DBI/SALA full body harnesses with DBI/SALA Nano-Lok single leg self-retracting lifelines (SRL).  The SRL was connected to the 3/8 inch wire rope.  The employer had provided fall protection training focused upon PFAS use with a single anchor point.  The employer had not provided retraining with regards to use of a horizontal lifeline.  This condition exposed employee to approximate 15.5 foot, 24 foot, and 58.5 foot fall hazards.
Recent events (2)
  • — I (O) $0
  • — Z (S) $0

View RK Mechanical INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342857489.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.