LOCKPORT, NY —
OSHA Inspection: PIVOT PUNCH CORPORATION
Referral inspection · Health discipline
At a glance
On , OSHA opened a referral health inspection of PIVOT PUNCH CORPORATION in 6550 CAMPBELL BOULEVARD, LOCKPORT, NY 14094 (NAICS 333514). OSHA activity number 342858214.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- PIVOT PUNCH CORPORATION
- Site address
- 6550 CAMPBELL BOULEVARD
- City
- LOCKPORT
- State
- NY
- ZIP
- 14094
- Mailing
- 6550 CAMPBELL BOULEVARD, LOCKPORT, NY 14094
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333514
- Employees
- 46
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.132 A
- Issued
- Mar 22, 2018
- Penalty
- Initial $6,984 · Current $6,300 Reduced
General-duty citation text
29 CFR 1910.132(a): Protective equipment was not used when necessary whenever hazards capable of causing injury and impairment were encountered: a) Heat Treat Area - On or about 12/29/17, the employer did not ensure that employees working at the Tondra Pot wore flame resistant clothing capable of protecting them from thermal burns. NO ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $6300
- — Z (S) $6984
1910.132 D01 I
- Issued
- Mar 22, 2018
- Penalty
- Initial $6,984 · Current $6,300 Reduced
General-duty citation text
29 CFR 1910.132(d)(1)(i): The employer did not assess the workplace to determine if hazards were present, or likely to be present, and did not select and have each affected employee use the types of Personal Protective Equipment (PPE) that would protect the affected employee from the hazards identified in the workplace hazard assessment: a) Heat Treat Area - On or about 12/29/17, the employer did not perform a personal protective equipment hazard assessment for employees working with materials such as, but not limited to, hot molten nitrating salts. The employer did not ensure that employees wore personal protective equipment necessary to protect them from this hazardous material. NO ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $6300
- — Z (S) $6984
1910.132 D01 II
- Issued
- Mar 22, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(1)(ii): The employer did not communicate personal protection equipment selection decision(s) to each affected employee: a) Heat Treat Area - On or about 12/29/17, the employer did not communicate PPE changes to employees exposed to thermal burns while working with hot molten nitrating salts. NO ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.132 D02
- Issued
- Mar 22, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.132(d)(2): The employer did not verify that the required workplace hazard assessment had been performed through a written certification that identified the workplace evaluated, the person certifying that the evaluation had been performed, the date(s) of the hazard assessment, and, which identified the document as a certification of hazard assessment: a) Heat Treat Area - On or about 12/18/17, PPE requirements for the heat treat area were upgraded. The employer did not maintain a written certification which verified that a new workplace PPE hazard assessment had been conducted. NO ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.132 F03 II
- Issued
- Mar 22, 2018
- Penalty
- Initial $6,984 · Current $0 Reduced
General-duty citation text
29 CFR 1910.132(f)(3)(ii): The employer did not retrain employees when changes in the types of PPE to be used rendered previous training obsolete: a) Heat Treat Area - On or about 12/18/17, PPE requirements were upgraded to include a leather jacket, leather gloves, and a nomex hood/head covering. The employer did not retrain employees on the new types of PPE that were required to be used. NO ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (O) $0
- — Z (S) $6984
More inspections at Pivot Punch Corporation
View Pivot Punch Corporation's full OSHA safety record →
More inspections in this industry (NAICS 333514)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342858214.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.