BINGHAMTON, NY —
OSHA Inspection: BUCKINGHAM MANUFACTURING CO., INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of BUCKINGHAM MANUFACTURING CO., INC. in 1-11 TRAVIS AVE., BINGHAMTON, NY 13904 (NAICS 316998). OSHA activity number 342865631.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BUCKINGHAM MANUFACTURING CO., INC.
- Site address
- 1-11 TRAVIS AVE.
- City
- BINGHAMTON
- State
- NY
- ZIP
- 13904
- Mailing
- P.O BOX 1690, BINGHAMTON, NY 13904
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 316998
- Employees
- 297
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C04 I
- Issued
- Jan 31, 2018
- Abate by
- Feb 12, 2018
- Penalty
- Initial $9,239 · Current $9,239
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) Steel Shop, on or about 1/4/18: Procedures are not utilized to control potentially hazardous energy when employees were engaged in servicing and/or maintenance activities, such as setting up and making adjustments to the Climber Bender machine.
Recent events (3)
- — J (S) $9239
- — C (S) $9239
- — Z (S) $9239
1910.212 A03 II
- Issued
- Jan 31, 2018
- Abate by
- Feb 20, 2018
- Penalty
- Initial $12,934 · Current $12,934
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) Steel Shop, on or about 1/4/18: Climber bender machine was not equipped with point of operation guarding which allowed the operator to have their hand in the danger zones during the operating cycles.
Recent events (3)
- — J (O) $12934
- — C (S) $12934
- — Z (S) $12934
1910.147 C07 I A
- Issued
- Jan 31, 2018
- Abate by
- Feb 12, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control: a) Steel Shop, on or about 1/4/18: The employer did not ensure that all employees performing servicing and/or maintenance activities, such as setting up, adjusting and maintaining equipment, had received training in the recognition of applicable hazardous energy sources and the methods and means necessary for energy isolation and control.
Recent events (3)
- — J (O) $0
- — C (S) $0
- — Z (S) $0
1910.134 F02
- Issued
- Jan 31, 2018
- Abate by
- Feb 20, 2018
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.134(f)(2): Employee(s) using a tight-fitting facepiece respirator were not annually fit tested: a) Buckingham Manufacturing Co., Inc., on or about 1/12/18: Employees who are required to wear tight-fitting half-mask respirators when powder coating and laying-up fiberglass, did not receive an annual respirator fit test to ensure proper fit and protection of the respirator.
Recent events (3)
- — J (O) $0
- — C (O) $0
- — Z (O) $0
More inspections at Buckingham Manufacturing CO., INC.
View Buckingham Manufacturing CO., INC.'s full OSHA safety record →
More inspections in this industry (NAICS 316998)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 342865631.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.